Loading A Workpiece - Roland JEWELA JWX-10 User Manual

Loading a Workpiece

Close the front cover.
Press the VIEW button to make the VIEW light come on.
The table moves back toward you.
Wait until operation has stopped completely, then open the front cover.
Next, install the cutter.
How to load the material
Load the material in correct.
OK
Workpiece
Mount the workpiece.
Workpiece
Attach the chucking knob.
Turn until the workpiece is held in place securely.
Turning it with too much force may damage the workpiece.
Chucking knob
Not OK
3-2 Getting Ready for Cutting Using the Rotary Axis
Not OK
Chapter 3 Operation 31