Table of Contents
Advertisement
3.
On the Comm Manager screen, tap Wi-Fi to enable or disable the wireless function.
When enabled, the On indicator is activated and available wireless networks will be detected. Follow the
steps in "Connecting to a Wireless Network" on page 128 to choose and connect to a wireless network.
Connecting to a Wireless Network
After Wi-Fi is turned on, your device scans for available wireless networks in your area.
1.
The network names of the detected wireless networks are displayed on a pop-up message window. Tap
the desired wireless network, and then tap OK .
Note
When you select an open (unsecured) network, you will be automatically connected to the network after
tapping OK . You do not need to do steps 2 and 3.
2.
On the next pop-up message window, do one of the following:
Tap The Internet if the wireless network connects your device to the Internet.
– or –
Tap Work if the wireless network connects your device to a private or corporate network.
3.
Enter the network key and then tap Connect .
Next time you use your device to detect wireless networks, you will not see the pop-up messages again, and
you will not be prompted to enter the network key of the previously accessed wireless network (unless you
perform a hard reset or clear storage which will erase custom settings on your device).
Note
Wi-Fi networks are self-discoverable, which means no additional steps are required for your device to connect to a
Wi-Fi network. It may be necessary to provide a user name and password for certain closed wireless networks.
128
Section 3B. Internet
Advertisement
Table of Contents
