Programming - Orbit 62001 Installation And User Manual

SUM252115 62001-24 rD.qxd
Job 97148 62001 Ins. EN/ES/FR

Programming

Set Clock Time and Day of Week.
Set Clock Time and Day of Week.
Push
I RESET
settings.
• Push
RESET
Push
settings.
I DAY
• Push the M at the top of the display. [See Figure 4] /
DAY
the M at the top of the display. [See Figure 4]
Figure 4
Push
NEXT
I
• Push
NEXT
Push
ENTER
to record. The time of day will begin flashing.
ENTER
Push and hold the + key to advance the cursor to the current
I
• Push and hold the + key to advance the cursor to the current
time of day. Use the - key to go in reverse. When time of day
time of day. Use the - key to go in reverse. When time of day is
is reached, press the
reached, press the
Programming
and keys at the same time to erase the current
OFF
and keys at the same time to erase the current
OFF
/ key. The display shows a blinking cursor below
TIME
key. The display shows a blinking cursor below
TIME
M T W T F S S
12:00
AM
Figure 4
key to move cursor to the desired day of week.
key to move cursor to the desired day of week. Push
to record. The time of day will begin flashing.
key to record.
ENTER
key to record.
ENTER
12
10/21/05
3/24/03
2 nd 3 rd
3:46 PM P
5:25 PM
S
12