Programming And Operation - Orbit b-hyve Quick Start Manual

Programming and Operation

Programming the timer
The app has help screens and video
to assist you with Wi-Fi connections,
programming, smart watering and other
general questions you may have.
Note: Your programmed schedules
are stored both in the app and on the
timer. Watering will continue, if Wi-Fi
connection is lost.
Manual Operation
All programming and full functionality
of the timer are available in the B-hyve
app. If you have the need, there are
some basic operations you can perform
directly at your timer.
Function Button Press
Hold until (water ALL stations) appears, then release.
MANUAL WATERING Quickly press again until desired station appears.
Default watering is 10 min. per station.
CANCEL STATION Press once to cancel current station.
RAIN DELAY
Set in app; blinks yellow and appears.
ON/OFF Hold for 10 sec. until turns white.
HARD RESET Quickly press 5 times.
7