(Using Trip Odometer Reset Stem) - GMC 2007 Yukon Denali Owner's Manual

2007 yukon denali; 2007 yukon xl denali
Hide thumbs Also See for 2007 Yukon Denali:
Table of Contents

Advertisement

Relearn Remote Key
This display allows you to match Remote Keyless
Entry (RKE) transmitters to your vehicle.
To match an RKE transmitter to your vehicle,
do the following:
1. Press the vehicle information button until
V
PRESS
TO RELEARN REMOTE KEY
displays.
2. Press the set/reset button until REMOTE KEY
LEARNING ACTIVE is displayed.
3. Press and hold the lock and unlock buttons
on the first transmitter at the same time for
about 15 seconds.
A chime will sound indicating that the
transmitter is matched.
4. To match additional transmitters at this time,
repeat Step 3.
Each vehicle can have a maximum of eight
transmitters matched to it.
5. To exit the programming mode, you must
cycle the key to LOCK.
Blank Display
This display shows no information.
252
DIC Operation and Displays

(Using Trip Odometer Reset Stem)

The DIC has different displays which can be
accessed by pressing the trip odometer reset stem
located on the instrument panel cluster. Pressing
the trip odometer reset stem will also turn off,
or acknowledge, DIC messages.
You can use the trip odometer reset stem to view
the following displays: odometer, engine hours,
trip odometer, and display language.
Trip Odometer Reset Stem Menu Items
Odometer
Press the trip odometer reset stem until
ODOMETER displays. This display shows the
distance the vehicle has been driven in either
miles (mi) or kilometers (km).
Engine Hours
To display the ENGINE HOURS, place the ignition
in LOCK or ACCESSORY, then press and hold
the trip odometer reset stem for four seconds while
viewing the ODOMETER. This display shows
the total number of hours the engine has run.

Advertisement

Table of Contents
loading

Table of Contents