Exterior Lamps - GMC 2007 Yukon Denali Owner's Manual

Using Cruise Control on Hills
How well your cruise control will work on hills
depends upon your speed, load, and the
steepness of the hills. When going up steep hills,
you may have to step on the accelerator pedal
to maintain the vehicle's speed. When going
downhill, you may have to brake or shift to a
lower gear to keep the vehicle's speed down.
Of course, applying the brake takes you out
of cruise control. Many drivers find this to be too
much trouble and do not use cruise control on
steep hills.
Ending Cruise Control
There are three ways to end cruise control:
•
Step lightly on the brake pedal.
•
Press the cancel button on the steering wheel.
•
Press the On/Off button on the steering
wheel.
Erasing Speed Memory
When you turn off the cruise control or the ignition,
the cruise control set speed memory is erased.

Exterior Lamps

It controls the following systems:
•
Headlamps
•
Taillamps
•
Parking Lamps
•
License Plate Lamps
•
Instrument Panel Lights
The exterior lamps
control is located on
the instrument panel
to the left of the
steering wheel.
203