Turning The Radio Tones/Alerts On Or Off; Setting The Tone Alert Volume Offset Level - Vertex Standard VXD-720 Operating Manual

1 Turning the Radio Tones/Alerts On or Off

You can enable and disable all radio tones and
alerts (except for the incoming Emergency alert
tone) if needed.
Procedure:
Press the programmed All Tones/Alerts button to
toggle all tones on or off.
OR
Follow the procedure below.
1 to access the menu.
2 or to "Utilities" and press
3 or to "Radio Settings" and press
select.
4 or to "Tones/Alerts" and press
lect.
5 or to "All Tones" and press
6 The display shows "Turn On". Press
able all tones and alerts. The display shows "All
Tones On".
OR
The display shows "Turn Off". Press
able all tones and alerts. The display shows "All
Tones Off".

1 Setting the Tone Alert Volume Offset Level

You can adjust the Tone Alert Volume Offset level if
needed.
This feature adjusts the volume of the tones/alerts,
allowing it to be higher or lower than the voice
volume.
Procedure:
1
2
3
to select.
select.
to
4
lect.
to se-
5
lect.
to select.
6
to en-
radio sounds a feedback tone with each corre-
sponding volume value.
7 Press
value. The display shows "Volume Offset Selected".
to dis-
OR
Repeat Step 6 to select another volume value.
OR
offset settings.
to access the menu.
or to "Utilities" and press
or to "Radio Settings" and press
or to "Tones/Alerts" and press
or to "Vol. Offset" and press
or to the required volume value. The
to keep the required displayed volume
to exit without changing the current volume
to select.
to
to se-
to se-
89