Remote Monitor; Initiating Remote Monitor - Vertex Standard VXD-720 Operating Manual

n

Remote Monitor

Use the Remote Monitor feature to turn on the
microphone of a target radio (subscriber alias or
IDs only). No audible or visual indication is given
to the target radio. You can use this feature to
monitor, remotely, any audible activity surrounding
the target radio.
Your radio must be programmed to allow you to
use this feature.

1 Initiating Remote Monitor

Procedure:
Use the programmed Remote Monitor button.
1 Press the programmed Remote Monitor but-
ton.
2 or to the required subscriber alias or ID
and press to select.
3 Radio sounds an alert tone and the LED blinks
green.
4 Wait for acknowledgment.
5 The display shows "Remote Monitor Successful".
OR
The display shows "Remote Monitor Failed".
6 If successful:
The radio starts receiving audio from the moni-
tored radio for a programmed duration.
Once the timer expires, the radio sounds an
alert tone and the LED turns off. The display
shows "Remote Monitor Ended".
OR
If unsuccessful:
The radio repeats the attempt until the pro-
grammed number of tries expires.
OR
Procedure:
Use the menu.
1 to access the menu.
2 or to "Contacts" and press
3 or to the required subscriber alias or ID
and press to select.
OR
or to "Manual Dial" and press
lect.
If there was previously dialed ID, the ID appears
along with a blinking cursor. Use the keypad to
edit the ID. Press to select.
OR
or to "Manual Dial" and press
lect. Key in the subscriber alias or ID and press
to select.
to select.
to se-
to se-
49