4
or
to the required message and press
to select.
A subject line may be shown if the message is
from an e-mail application.
5 Press
once more to access the sub-menu.
6
or
to "Reply" and press
7
or
to "Write" and press
A blinking cursor appears. Use the keypad to
write your message.
OR
or
to "Quick Text" and press
lect.
A blinking cursor appears. Use the keypad to
edit your message, if required.
8 Press
once message is composed.
9 The display shows "Text Message: <Subscriber/
Group Alias or ID>", confirming your message is
being sent.
10 If the message is sent successfully, a tone
sounds and the display shows "Message Sent".
OR
If the message cannot be sent, the display
shows "Message Send Failed".
If the message fails to send, the radio returns you
to the "Resend" option screen (see Managing Fail-
to-Send Text Messages on page 74).
80
1 Deleting a Text Message from the Inbox
Procedure:
Press the programmed Text Message button and
proceed to Step 3.
OR
Follow the procedure below.
to select.
1
to select.
2
lect.
3
to se-
4
A subject line may be shown if the message is
from an e-mail application.
5 Press
6
7 At "Delete Message?",
press
8 The display shows "Message Deleted".
9 The screen returns to the Inbox.
to access the menu.
or
to "Messages" and press
or
to "Inbox" and press
or
to the required message and press
to select.
once more to access the sub-menu.
or
to "Delete" and press
to select.
to se-
to select.
to select.
or
to "Yes" and