Deleting All Sent Text Messages From Sent Items; Receiving A Text Message; Reading A Text Message - Vertex Standard VXD-720 Operating Manual

1 Deleting All Sent Text Messages from Sent
Items
Procedure:
Press the programmed Text Message button and
proceed to
Step 3.
OR
Follow the procedure below.
1 to access the menu.
2 or to "Messages" and press
3 or to "Sent Items" and press
4 or to "Delete All" and press
5 At "Delete Message?", press
The display shows "Sent Items Cleared".
OR
At "Delete Message?",
press to return to the previous screen.
When you select Sent Items and it contains no
text messages, the display shows "List Empty", and
sounds a low tone if Keypad Tones are turned on (see
Turning Keypad Tones On or Off on page 86).
78
to select.
to select.
] to select.
to select "Yes".
or to "No" and

1 Receiving a Text Message

When your radio receives a message, the display
shows the alias or ID of the sender and the
message icon at the far left of the screen.
You can select one of the following options when
receiving a text message:
• Read?
• Read Later
• Delete
NOTE: The radio exits the Text Message alert
screen and sets up a Private or Group Call
if the PTT button is pressed when the radio
is displaying the alert screen.

1 Reading a Text Message

Procedure:
1 or to "Read?" and press
2 Selected message in the Inbox opens.
A subject line may be shown if the message is
from an e-mail application.
3 Press to return to the Inbox.
OR
Press to reply, forward, or delete the text
message.
to select.