Radio Operations - Clarion NX409 Owner's Manual & Installation Manual

Radio Operations

Listening to the Radio
1. Touch the Tuner button on the Main menu
display. The tuner mode screen is displayed.
. Press the [BAND] button or touch the [Band]
key on remote control to select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order: FM1 FM FM AM FM1...
5 1
6 
14
15 16 17
9 11
10 1
Seek Tuning
1. Press the [BAND] button to select the radio
band (FM or AM).
. Touch the [ ] or [
seek a station.
• When touching the [
sought in the direction of higher frequencies.
• When touching the [
sought in the direction of lower frequencies.
Manual Tuning
1. Press the [BAND] button to select the radio
band (FM or AM).
. Touch the [ ] or [
seek a station.
• When touching the [
sought in the direction of higher frequencies.
• When touching the [
sought in the direction of lower frequencies.
Recalling a preset station
There are  ways to recall the preset station.
• Using the remote control:
1. Press the [BAND] button to select the
desire band (FM or AM) on the remote
control.
. Press the preset number (1 to 6) on
numeric pad.
NX409/NZ409
7  4
8
18 19 0 1
1
] key to automatically
] key, the station is
] key, the station is
] key to automatically
] key, the station is
] key, the station is
1. Tuner display
. Signal intensity
. Time display
4. Return to previous
screen
5. Band display
6. Loc/DX display
7. Stereo/Mono
signal mode
8. Preset list
9. Seek down
10. Tune down
11. Scan button
• Using the tuner unit:
1. Press the [BAND] button to select the
desire band (FM or AM) on the tuner.
. Press the preset station (1 to 5) on tuner
display.
. Press [ ] or [
or down the preset list.
4. Press [AS] button to auto search and store
the stations.
Auto Store
The Auto Store is a function for storing up to 1
stations that are automatically tuned in
sequentially. If 1 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Touch the [Band] key to select the desired
band. (FM or AM)
. Touch the [AS] key momentarily to start
the Auto Store function.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
1. Tune Up
1. Seek Up
14. Band button
15. AS button
16. PS button
17. LOC/DX Button
18. Slide Bar (Use it
to hide some
function buttons)
19. Previous page
button
0. Next page button
1. EQ mode button
] to select next station up
1