Clarion NX409 Owner's Manual & Installation Manual page 18

Basic Operations
Adjusting the volume
Turn the volume knob to adjust the volume.
Clockwise : Increases the volume.
Counter- clockwise : Decreases the volume.
• The volume level indicated in the display is
in a range from 0 (min.) to 40 (max.).
CAUTION
While driving, keep the volume level at which
external sounds can be heard.
Mute
Press the [MUTE] [PWR] button to turn mute On
and Off.
Adjusting the Settings
1. Press [Setup] to enter setting menu mode.
. Press the desired mode button.
Modes come in the following order:
• General, including Clock settings, Beep,
Camera Image, Radio Field, Tel Mute, Tel
SP, Auxin Input SW, Version.
• Video, ASP, Navigation, Misc.
. Perform the adjustment for the desired item.
See the following sections fo details.
Adjusting the Audio
1. Press the [EQ] button on the screen or
the [SEL] button on the remote control.
. Touch the item key to adjust.
. Perform the adjustment.
See the following sections for detail.
18
4.Touch the [ ] key to return to the previous
screen.
* In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
Adjusting the Balance/Fade
1. Touch the BALANCE or FADE in the
Audio Settings.
. Touch the [F] or [R] key to adjust to the
fader level.
• The factory default setting is "0".
(Adjustment range: front 9 to rear -9)
. Touch the [L] or [R] key to adjust to the
balance level.
• The factory default setting is "0".
(Adjustment range: left -9 to right 9)
Adjusting the Bass
The bass gain and bass frequency can
be adjusted as follows.
1. Touch [-] or [+] key to set the
desirable level.
Adjusting the Treble
The treble gain and treble frequency can
be adjusted as follows.
1. Touch [-] or [+] key to set the desirable
level.
. To set the treble center frequency, enter
the ASP adjustment in the SETUP menu.
NX409/NZ409