Radio Operations - Clarion VX401 Owner's Manual & Installation Manual

Radio Op.=;.e:..:ra::.::t::.::i o ::.,:n.:.:s::...- _
Listening to the Radio Recalling
a
preset station
1. Touch the desired Band key to select the
band you wish to store in.
2. Tune in the station you wish to store using the
seek tuning, manual tuning, or preset tuning.
3. Touch and hold the desired Preset key you
wish to store the current station for more than
2 seconds.
Auto Store
There are 2 ways to recall the preset station.
• Using the tuner unit:
1. Touch the [BAND] key to select the
desire band (FM or AM) on the tuner.
2. Touch the [List] key to display the Preset
List screen.
3. Touch the preset station (1 to 12) on tuner
display.
4. Touch [ .. ] or [
T ]
to select next station
up or down the preset list.
5. Touch the [PS] button to begin scanning
the preset stations.
• Using the remote control:
1. Touch the [BAND] button to select the
desire band (FM or AM) on the remote
control.
2. Touch the preset number (1 to 12) on
numeric pad.
Manual memory
6 - List key
7 - Seek Down key
8 - Seek Up key
9 - Eject key
10 - Main Menu key
11 - Tuner display
1 - Band key
2 - Scan key
3 - Tune Up key
4 - Tune Down key
5 - Audio Settings
key
Seek Tuning
1. Touch the [Tuner] key on the Main menu
display. The tuner mode screen is displayed.
2. Touch the [BAND] key or touch the [BAND]
button on remote control to select the radio
band. Each time the button is pressed, the
radio reception band changes in the following
order: FM1, FM2, FM3, AM, FM1 ...
1. Touch the [BAND] key to select the radio
band (FM or AM).
2. Touch the
[~
] or
[s!. ]
key to
automatically seek a station.
• When touching the [ A ] key, the station is
Seek
sought in the direction of higher frequencies.
• When touching the [
s!k ]
key, the station is
sought in the direction of lower frequencies.
Manual Tuning
1. Touch the [BAND] key to select the radio
band (FM or AM).
2. Touch the [M~J or [M!.k] key to
manually seek a station.
• When touching the [ A ] key, the station is
M-Seek
tuned in the direction of higher frequencies.
• When touching the [M%.k] key, the station is
tuned in the direction of lower frequencies.
The Auto Store is a function for storing up to 12
stations that are automatically tuned in
sequentially. If 12 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
1. Touch the [Band] key to select the desired
band. (FM or AM)
2. Touch the [Auto Store] key to start
the Auto Store function.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
20
VX401 NZ40 1