Clarion NX702E Owner's Manual

Clarion NX702E Owner's Manual

Dvd multimedia station with built-in navigation & 7" touch panel control
Table of Contents

Advertisement

Owner's manual
NX702E
DVD MULTIMEDIA STATION WITH BUILT-IN NAVIGATION & 7" TOUCH
PANEL CONTROL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NX702E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Clarion NX702E

  • Page 1 Owner's manual NX702E DVD MULTIMEDIA STATION WITH BUILT-IN NAVIGATION & 7” TOUCH PANEL CONTROL...
  • Page 2 To prevent direct exposure to the laser beam, laserdiodin, joka lähettää näkymätöntä do not try to open the enclosure. silmille vaarallista lasersäteilyä. !CAUTION USE OF CONTROLS OR ADJUSTMENTS NX702E OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE 531-1602kHz 87.5-108MHz OWNER’S MANUAL MAY RESULT IN 03 XXXX HAZARDOUS RADIATION EXPOSURE.
  • Page 3: Table Of Contents

    Contents Thank you for purchasing this Clarion product. • Please fully read this owner’s manual before operating this equipment. • Check the contents of the enclosed warranty card and store it in a safe place with this manual. 1. FEATURES ........................3 Expanding Systems ......................
  • Page 4: Features

    6 Channel Amplifier USB Memory ® ® iPod / iPhone (Connect via CCA-750) Portable Player ® Bluetooth (Connect via AUX IN) cellular phone DAB Tuner (DAB302E:Sold by SD Card separately) Notes: •  T he items listed outside of the frames are the commercial products generally sold. • CCA-750: Sold separately. NX702E...
  • Page 5: Precautions

    7. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. ® and any use of such marks by Clarion Co.,Ltd, is under license. 8. DivX , DivX Certified and associated logos are trademarks of Rovi Corporation or its ®...
  • Page 6: Cautions On Handling

    • The USB memory sticks must be recognized as “USB mass storage class“ to work properly. Some models may not operate correctly. W hen the memorized data is lost or damaged by any chance, Clarion shall not be liable for any damage. When using an USB memory stick, we recommend that you backup your data stored on it before using a personal computer etc.
  • Page 7: Handling Discs

    Storage • Do not expose discs to direct sunlight or any heat source. • Do not expose discs to excess humidity or dust. • Do not expose discs to direct heat from heaters. NX702E...
  • Page 8: Controls

    [ + ] [OPEN] [MENU ALL ] RESET [MIC] Press [OPEN] button to slide down the panel. Left Side Front Side Disc Slot ] EJECT MicroSD card slot SD Card Slot Only navigation map card is available and don't remove it when unit is power on. NX702E...
  • Page 9 2. Select “Load settings”, currennt speaker MID L,R 2Way multi settings are kept. HIGH L,R mode REAR L,R The way of SENSOR control ( / + / - ) MUTE VOL UP (1 degree) VOL DOWN (1 degree) MENU (long press) NX702E...
  • Page 10: Remote Control

    • Enter navigation mode • Number input mode [PIC] Button [BACK] Button • Adjust screen • Back from source menu return to previous display [BAND] Button • Select tuner band ], [ ], [ ], [ ] Buttons • Move cursor up/down/left/right [TA] Button • TA switch NX702E...
  • Page 11 2. Insert the battery with the plus (+) and minus (–) poles aligned properly. • When using for the first time, pull out the film protruding from the tray. 3. Close the back cover. NX702E...
  • Page 12: Main Menu Operation

    [ W a l l p a p e r] : T o u c h t h e i c o n t o e n t e r Wallpaper setting menu. (see “System Setup”) [Monitor Off]: Touch the icon to turn off the monitor. To turn on the monitor, touch the monitor again. NX702E...
  • Page 13: System Setup

    Touch [Set] to select one color, touch [OK] to confirm. to confirm or [Back] to exit without saving. Initialize: Load original buttons backlight. Touch [ BACK ] on the bottom left of the screen to return to main setting menu. NX702E...
  • Page 14 Touch buttons on the The setting is only for Day or Night. screen to adjust. Rear HPF (Normal Mode) Touch [Setup] on the right to Rear HPF to spread the setting list. Touch buttons on the screen to adjust. NX702E...
  • Page 15 Select subtitle language from list. • Set Password To set password for parental control, Touch [Set] to show password menu. Input numbers by touching the digit and [OK] buttons. Touch [X] button to delete a digit inputted. Touch [Back] to exit. NX702E...
  • Page 16: Disc Operation

    • The number of recorded subtitle languages two sessions have been recorded. The first are indicated by the icon shown below. session is Audio session and the second session is Data session. Your personally- created CDs with more than second data NX702E...
  • Page 17 The DVD video system assigns a region number to DVD video players and DVD discs by sales area. DVD video players sold in the Europe can play back DVD discs with the region number “ALL”, “2” or any combination NX702E...
  • Page 18: Accessing A Disc

    The disc plays automatically after loading. Notes: • N ever insert foreign objects into the disc slot. • I f the disc is not inserted easily, there may be another disc in the mechanism or the unit may require service. NX702E...
  • Page 19: Dvd Player Operation

    13. Back to main operation bar Touch [Chapter] or [Title] to show DVD chapter/title list. DVD audio select During playback, touch [ ], [Audio] buttons to select audio language to listen if the DVD has multiple audio languages. NX702E...
  • Page 20 During playback, touch [ Picture ] button, then use [-], [+] buttons to adjust Dimmer/Brightness/Contrast/Color. DVD angle select ], [ Angle ] During playback, touch [ buttons to select different angle to view if the DVD has multiple-angle views. NX702E...
  • Page 21: Cd Player Operation

    ] button to perform random play. Selecting a track Track-up 1. Touch the [ ] button to move to the beginning of the next track. Track-down 1. Touch the [ ] button to move back to the beginning of the current track. NX702E...
  • Page 22: Mp3/Wma Playback

    The files will be played soundlessly if you attempt to play files without MP3/WMA data. * When VBR files are played, the play time display may differ the play location. * When MP3/WMA files are played, a little no sound part is caused between tunes. NX702E...
  • Page 23: Playback Menu

    3. Play/Pause 4. Repeat play 5. Previous track Fast reverse (long press) 6. Progress bar 7. Next track Other operations about playing MP3/WMA Fast forward (long press) are same as CD Player mode. 8. Random play 9. Show other options NX702E...
  • Page 24: Mp4/Divx Playback

    Drag up/down to browse, and touch desired option to select it. Pausing play 1. Touch the [ ] button on the screen to pause play. “ PAUSE” appears in the display. 2. Touch [ ] button to resume play. NX702E...
  • Page 25: Sd/Usb Operation

    [SD] to enter SD mode. If [SD] is not on the current source menu, touch [ - ] buttons on the bottom of the screen, or hold the center of screen and drag left/right to show more icons. NX702E...
  • Page 26: Sd/Usb Audio Operation

    Notes: • T his system will not operate or may operate improperly with some card or USB. • F iles protected with any DRM cannot be played. • O nly USB device, DivX is available. Operation about SD/USB video is same as MP4/DivX playback mode. NX702E...
  • Page 27: Bluetooth Operation

    4. Search for new Bluetooth devices. model number, Signal, Battery. 5. Select NX702E from the pairing list on the 1. To select other paired device, hold the mobile phone. middle right of the screen, and drag it left 6.
  • Page 28: Making A Call

    14. Show Bluetooth information 15. Bluetooth indicator Making a call • Dial Number 1. Input numbers by digit-keys on the screen. 2. Touch [ ] button to dial. Touch [ ] button to delete characters. 3. Touch [ ] button to terminate call. NX702E...
  • Page 29: Bluetooth Audio Operation

    Please Track-up consult your nearest Clarion dealer for more 1. Touch the [ ] button to move to the information on the product of wireless audio beginning of the next track.
  • Page 30: Radio Operation

    11. Choose local or distant seeking mode 2. When a desired station is tuned in, press 12. Turn on/off Traffic Announcement the [ ] button to continue receiving that 13. Turn on/off Alternative Frequency station. 14. Turn on/off Regional NX702E...
  • Page 31 1. After auto store, the previous stored stations will be overwritten. 2. T he unit has 4 bands, such as FM1, FM2, FM3 and AM. FM3 and AM can store by AS function. Each bands can store 6 stations, NX702E can store 24 stations in total. Manual store When one expected radio station has been detected, touch [...
  • Page 32: Radio Data System Operation

    [Seek] to begin searching. “REG” indicator lights/blinks up and REG function turns on. • REG OFF: “REG” indicator turns gray and REG function turns off. Notes: • T his function is disabled when a national station such as BBC R2 is being received. • T he REG function ON/OFF setting is valid when the AF function is ON. NX702E...
  • Page 33: Dab Operation(Dab302E (Sold Separately) Is Required)

    / lower station. To stop searching, repeat the operation above or press other buttons having radio functions. Note: When a station is received, searching stops and the station is played. 9. Turn on/off Service Link. 10. Turn on/off traffic announcement. NX702E...
  • Page 34 2. Touch to select a preset service. PTY Search Touch [ ] button on the operation bar, and then touch [PTY Select] to show PTY type. Drag up/down to scroll, and touch to select. Touch [Seek] to seek a channel within the selected category. NX702E...
  • Page 35: Ipod & Iphone Operation

    Fast reverse (long press) 2. Touch the [ ] button twice to move back 7. Progress bar to the beginning of the previous track. 8. Next track Fast forward (long press) 9. Random play 10. Show other options NX702E...
  • Page 36: Repeat Play

    [Wide screen] to set it to [On]. iPod video playback To playback video from iPod, touch top left corner of the screen, then select a video file to play. During playback, touch the bottom half of screen to show operation bar. NX702E...
  • Page 37: Dvb-T Operation

    ] buttons on the operation bar. 2. Select [OK] on the dialogue box to begin Select a channel on the screen to play. Touch scanning and storing available channels in the image on the right to play full screen. the memory. NX702E...
  • Page 38 Direct search To access search menu, touch following buttons: [ ] -> [ Input numbers by touching digit buttons, then touch [Search] to begin searching. To delete numbers, touch [ ] button. NX702E...
  • Page 39: Navigation Operation

    [AUX] to visit rear auxiliary device. If [AUX] is not on the current source menu, touch [ - ] buttons on the bottom of the screen, or hold the center of screen and drag left/right to show more icons. NX702E...
  • Page 40: Trouble Shooting

    There are red, panel is produced according to technology green, and blue ____________________ with very high precision. Note that, though points in display there are effective pixels of 99.99% or more, pixel missing or normally lit pixels account for 0.01%). NX702E...
  • Page 41: Disc Player

    “NO the card or USB device. device. FILE” shown. Use connection cable for The video signal is no connect iPod Video.(CCA-750) No video image of iPod Video The video signal is wrong Check wiring and correct. connection. NX702E...
  • Page 42: Error Displays

    If an error display other than the ones described above appears, press the [RESET] button. If the problem persists, turn off the power and consult your store of purchase. * When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared. NX702E...
  • Page 43: Specifications

    55g (including battery) M4V(.m4v), MP4(.mp4): MPEG4part2(Simple),MPEG4 AVC/ H.264(Baseline@2.1) 3GP(.3gp): MPEG4part2(Simple) Resolution : 480x272 Audio format :AAC,AMR,MP3,WMA,WAV Bluetooth 178mm 100mm Specification: Bluetooth Ver. 2.0+EDR Note: Specifications and design are subject to Profile: HFP (Hands-free Profile) change without notice for further improvement. NX702E...
  • Page 44: Wiring And Connections

    18. WIRING AND CONNECTIONS NX702E GPS Antenna GPS Antenna (Black) (Black) External Microphone External Microphone Connection Connection (Black) (Black) Black (Black) DVB-T Antenna DVB-T Antenna (Black) (Black) DVB-T Antenna DVB-T Antenna (Black) (Black) (Black) (Black) Radio Antenna Radio Antenna Refer to next page.
  • Page 45 Front left (+)/MID-L(+) / White Illumination / Orange with white stripe Front left (-)/MID-L(-) / White with black stripe ACC+ / Red Rear left (+)/HIGH-L(+) / Green Rear left (-)/HIGH-L(-) / Green with black stripe Ground / Black Yellow Yellow VW, Audi NX702E...
  • Page 46 Clarion Co., Ltd. All Rights Reserved. Copyright © 2012: Clarion Co., Ltd. Printed in China...
  • Page 47 Owner's manual NX702E Navigation...
  • Page 48 Easy navigation map updates It is easy to keep the navigation system up to date. Simply download new map data from Clarion’s portal site, store them on a microSD card and insert it into the Clarion NX702E via the front card slot.
  • Page 49 3.1.2.5 Searching for a Place of Interest by its Phone Number ............. 46   3.1.2.6 Selecting nearby assistance from 'Where Am I?' ............... 47   3.1.3 Selecting a map location as the destination ............... 49   3.1.4 Selecting the destination from your Favourites ..............49 NX702E English 3...
  • Page 50 5.1.8 Traffic information in route planning ................76   5.1.8.1 Real-time traffic information (TMC)..................76 5.2 'More' menu........................78  5.3 Settings menu ....................... 79    5.3.1 Sound and Warnings......................80   5.3.2 Customise Quick menu...................... 82   5.3.3 Traffic settings ........................82 4 NX702E English...
  • Page 51 5.3.6 Map settings........................87   5.3.7 Visual guidance settings ....................89   5.3.8 Display settings........................90   5.3.9 Regional settings........................ 90   5.3.10 Trip monitor settings......................91 6 Glossary........................92   7 End User Licence Agreement................94   8 Copyright note.......................94   NX702E English 5...
  • Page 52: Warnings And Safety Information

    The navigation system helps you find your way to your destination with a connected GPS receiver. Clarion Mobile Map does not transmit your GPS position; others cannot track you. It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate Clarion Mobile Map before you start your journey.
  • Page 53: Getting Started

    2. Getting started Clarion Mobile Map is optimised for in-car use. You can use it easily by tapping the screen buttons and the map with your fingertips. When using the navigation software for the first time, an initial setup process starts automatically.
  • Page 54: Buttons And Other Controls On The Screen

    The initial setup is now complete. The Configuration wizard can be restarted later from the Settings menu (page 79). After the initial setup, the Map screen appears and you can start using Clarion Mobile Map. 2.1 Buttons and other controls on the screen When you are using Clarion Mobile Map, you usually tap buttons on the touch screen.
  • Page 55 Slider When a feature can be set Drag the handle to to different values in a move the slider to range, Clarion Mobile Map its new position. shows an indicator on a • Tap the slider gauge that displays and where you want sets the value.
  • Page 56: Using Keyboards

    Finalising the keyboard entry (accepting the suggested search result) Finalising the keyboard entry (opening the list of search results) Finalising the keyboard entry (saving your input) Cancelling the keyboard entry (returning to the previous screen) 10 NX702E English...
  • Page 57: Beyond Single Screen Tap

    Depending on the speed of the sliding, the list will scroll fast or slow, only a bit or till the end. • Moving the map in map browsing mode: grab the map, and move it in the desired direction. NX702E English 11...
  • Page 58: Map Screen

    When GPS position is available, the Vehimarker is displayed in full colour, now showing your current position. There are screen buttons and data fields on the screen to help you navigate. During navigation, the screen shows route information. 12 NX702E English...
  • Page 59 If Clarion NX702E is capable of receiving live traffic information, the calculation takes into account traffic delays affecting your route if they are received. However, this calculation is rarely accurate.
  • Page 60: Position Markers

    2.2.3 Objects on the map 2.2.3.1 Streets and roads Clarion Mobile Map shows the streets in a way that is similar to how the paper road maps show them. Their width and colours correspond to their importance: you can easily tell a motorway from a small street.
  • Page 61: Turn Preview And Next Street

    The same symbols are used in both fields: Icon Description Turn left. Turn right. Turn back. Bear right. Turn sharp left. Keep left. Continue straight in the intersection. Go left on the roundabout, 3rd exit (next manoeuvre). Enter roundabout (second next manoeuvre). NX702E English 15...
  • Page 62: Lane Information And Signposts

    When navigating on multi-lane roads, it is important to take the appropriate lane in order to follow the recommended route. If lane information is available in the map data, Clarion Mobile Map displays the lanes and their directions using small arrows at the bottom of the map.
  • Page 63: Junction View

    Tap any of them to display it on the map and add it as a waypoint to your route if needed. If you want to display other types of Places for the exits, you can change the icons in Visual Guidance settings (page 89). NX702E English 17...
  • Page 64: Object Types

    3D buildings 3D block representation of full city building data containing actual building size and position on the map. 2.2.3.7 Elements of the active route Clarion Mobile Map shows the route in the following way: Symbol Name Description Current GPS position and Your current position displayed on the map.
  • Page 65: Traffic Events

    Note! If there are traffic events on the recommended route that the application has not bypassed, the icon will open the list of significant traffic events to let you quickly check them. NX702E English 19...
  • Page 66: Manipulating The Map

    Zooming in and out Changes how much of the map is displayed on the screen. Clarion Mobile Map uses high-quality vector maps that let you examine the map at various zoom levels, always with optimised content. It always displays street names and other text...
  • Page 67: Quick Menu

    It can be opened directly from the Map screen by tapping The menu will close after a few seconds of inactivity or if you tap Most of these functions are shortcuts. They are accessible from the menu system. NX702E English 21...
  • Page 68 This button skips the next waypoint from the route. My Route / Overview This button opens a 2D map scaled and positioned to (page 56) show the entire route. More / Settings / This button opens the Visual Guidance settings screen. Visual Guidance (page 89) 22 NX702E English...
  • Page 69 GPS reception This button offers your Home location as a destination. More / Settings / This button opens the parameters of the selected Vehicle Route (page 83) profile. NX702E English 23...
  • Page 70: Checking The Details Of The Current Position (Where Am I?)

    You can also perform some actions on this screen: to save the current position as a Favourite destination. You can also search for assistance near your current position. Tap open a new screen for the Quick search: 24 NX702E English...
  • Page 71: Navigation Menu

    : Petrol stations Tap any of the buttons, select a Place from the list, and navigate to it. 2.3 Navigation Menu You can reach all parts of Clarion Mobile Map from the Navigation Menu. You have the following options: •...
  • Page 72 The button itself is a miniature live map that shows your current position, the recommended route and the surrounding map area. Tap the button to enlarge the map to the full screen. • to open the Traffic Summary screen. 26 NX702E English...
  • Page 73: On-Road Navigation

    3 On-road navigation When first started, Clarion Mobile Map calculates routes using the road network of the high quality vector maps provided with the product. You can set up your route in different ways: • If you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation).
  • Page 74: Entering An Address

    Navigation Menu. In the Navigation Menu, tap the following buttons: By default, Clarion Mobile Map proposes the country and city/town where you are. If needed, tap , enter the first few letters of the country name on the keyboard, and select one country from the list of results.
  • Page 75 A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The Cursor ( ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. NX702E English 29...
  • Page 76: Entering The Midpoint Of A Street As The Destination

    If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the street from the list. 30 NX702E English...
  • Page 77: Selecting An Intersection As The Destination

    If you are on the Map screen, tap to return to the Navigation Menu. In the Navigation Menu, tap the following buttons: If necessary, modify the country and city/town as described earlier (page 28). Enter the street name: NX702E English 31...
  • Page 78 After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 32 NX702E English...
  • Page 79: Selecting A City/Town Centre As The Destination

    If the desired name does not show up, the names that match the string appear in a list after entering a couple of characters (to open the list of results before it appears automatically, tap ). Select the city/town from the list. NX702E English 33...
  • Page 80: Entering An Address With A Postal Code

    Navigation Menu. In the Navigation Menu, tap the following buttons: If necessary, modify the country as described earlier (page 28). Enter a new city/town using its postal code: to open the numeric keypad. 34 NX702E English...
  • Page 81 (to open the list of results before it appears automatically, tap ). Select the street from the list. Enter the house number: Enter the house number on the keyboard. (To enter letters, tap NX702E English 35...
  • Page 82: Tips On Entering Addresses Quickly

    • You can speed up finding an intersection: • Search first for the street with a less common or less usual name; fewer letters are enough to find it. 36 NX702E English...
  • Page 83: Selecting The Destination From The Places Of Interest

    3.1.2 Selecting the destination from the Places of Interest You can select your destination from the Places of Interest included with Clarion Mobile Map. Using the same screen, you can find a Place in different ways: •...
  • Page 84: Searching For A Place Of Interest Using Preset Categories

    3.1.2.2 Searching for a Place of Interest using preset categories The Preset search feature lets you quickly find the most frequently selected types of Places. If you are on the Map screen, tap to return to the Navigation Menu. 38 NX702E English...
  • Page 85 If there is no active route (destination is not selected), they are searched around the current position. • If the current position is not available either (no GPS signal), they are searched around the last known position. NX702E English 39...
  • Page 86: Searching For A Place Of Interest By Category

    3.1.2.3 Searching for a Place of Interest by category You can search for Places of Interest by their categories and subcategories. If you are on the Map screen, tap to return to the Navigation Menu. In the Navigation Menu, tap the following buttons: 40 NX702E English...
  • Page 87 (The result list will be ordered by the length of the necessary detour.) (optional) If you have selected , select the city/town to search in. Select one of the main Place categories (e.g. Accommodation) or tap to list all Places around the selected location or along the route. NX702E English 41...
  • Page 88 13. If necessary, tap the map somewhere else to modify the destination. The Cursor ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. 42 NX702E English...
  • Page 89: Searching For A Place Of Interest By Name

    • to search for a place around the destination of the active route. (The result list will be ordered by the distance from the destination.) NX702E English 43...
  • Page 90 Select one of the main Place categories (e.g. Accommodation) to search in or tap to search among all Places. Select one of the Place subcategories (e.g. Hotel or Motel) to search in or tap to search in the selected Place category. 44 NX702E English...
  • Page 91 14. If necessary, tap the map somewhere else to modify the destination. The Cursor ) appears at the new location. Tap to confirm the destination, or tap to select a different destination. NX702E English 45...
  • Page 92: Searching For A Place Of Interest By Its Phone Number

    The name and address of the Place is displayed at the top of the screen. (optional) Tap to see the details of the selected Place. Tap to return to the map. 46 NX702E English...
  • Page 93: Selecting Nearby Assistance From 'Where Am I

    Preset search categories appear, all for searching around the current position (or around the last known position if the current position is not available): • : Car repair and roadside assistance services • : Medical and emergency services NX702E English 47...
  • Page 94 After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. 48 NX702E English...
  • Page 95: Selecting A Map Location As The Destination

    Adding a location to the list of Favourite destinations is described on page 65. Access the list of Favourites: • If you are on the Map screen, tap to open the Quick menu. • If you are in the Navigation Menu, tap NX702E English 49...
  • Page 96: Selecting Your Home Location

    Now that the Home location is set, you can quickly navigate to it: To select the Home location, do one of the following: • If you are on the Map screen, tap and then tap (this button can be added to the Quick menu in Settings - page 82). 50 NX702E English...
  • Page 97: Selecting A Recent Destination From The History

    The destinations that you have set earlier appear in the History. Access the History: • If you are on the Map screen, tap and then tap • If you are in the Navigation Menu, tap and then tap NX702E English 51...
  • Page 98: Entering The Coordinate Of The Destination

    3.1.7 Entering the Coordinate of the destination You can also select a destination by entering its coordinate. Do as follows: If you are on the Map screen, tap to return to the Navigation Menu. In the Navigation Menu, tap 52 NX702E English...
  • Page 99 After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. Tap to modify route parameters, or tap and start your journey. NX702E English 53...
  • Page 100: Navigate To A Location Stored In A Photo

    Other picture files do not appear in the list. Files must be located on an inserted SD card or USB pendrive, either in the root folder or in a "pictures" folder. 54 NX702E English...
  • Page 101: Building A Route From The List Of Destinations (Create Route)

    When the new destination is selected, the list returns. To add more destinations, tap where you want to insert the new route point in the list, and repeat the above procedure. NX702E English 55...
  • Page 102: Viewing The Entire Route On The Map

    3.3 Checking route parameters and accessing route related functions You can check different parameters of the route recommended by Clarion Mobile Map. If you are on the Map screen, tap to return to the Navigation Menu.
  • Page 103: Modifying The Route

    (intermediate destination) to the route or append the newly selected destination at the end of the current route. • to plan a new route to the newly selected location. The previous destination and waypoint(s) are deleted. NX702E English 57...
  • Page 104: Setting A New Starting Position For The Route

    GPS position. If you are on the Map screen, tap to return to the Navigation Menu. In the Navigation Menu, tap If you already have a route, tap . If you are starting a new route, 58 NX702E English...
  • Page 105: Editing The List Of Destinations (Edit Route)

    You can edit the route by modifying the list of destinations. You can add or remove destinations, modify the start position or reorder the list. If you are on the Map screen, tap to return to the Navigation Menu. In the Navigation Menu, tap NX702E English 59...
  • Page 106: Pausing The Active Route

    3.4.4 Pausing the active route You do not need to pause the active route: when you start driving again, Clarion Mobile Map restarts the voice instructions from your position. 3.4.5 Cancelling the active route To cancel the navigated route, do one of the following: •...
  • Page 107: Checking Route Alternatives When Planning The Route

    Select one of the route alternatives and tap to return to the previous screen. Clarion Mobile Map recalculates the route. The orange line now shows the new recommended route. NX702E English 61...
  • Page 108: Checking Route Alternatives For An Existing Route

    You see the basic details of three route alternatives with the selected route planning method. Tap any of them to see it on the map. Or if you cannot find a good alternative, tap and scroll down for routes with different routing methods. 62 NX702E English...
  • Page 109: Changing The Vehicle Used In Route Planning

    Select one of the route alternatives then tap and hold for a few seconds to return to the Map screen. Clarion Mobile Map recalculates the route. The orange line now shows the new recommended route. 3.4.8 Changing the vehicle used in route planning To recalculate the active route for a different vehicle, do as follows.
  • Page 110: Changing The Road Types Used In Route Planning

    Clarion Mobile Map plans the best toll-free route. • - Clarion Mobile Map includes ferries in a planned route by default. However, a map does not necessarily contain information about the accessibility of temporary ferries. You might also need to pay a fare on ferries.
  • Page 111: Saving A Location As A Favourite Destination

    When the full screen map appears with the selected location in the middle, tap (optional) Using the keyboard, you can change the name offered for the Favourite. Tap to enter numbers or symbols. to save the location as a new Favourite destination. NX702E English 65...
  • Page 112: Saving A Location As An Alert Point

    On the newly opened screen, select the type of the alert point, the direction from which you expect the alert, and (if applicable) the speed limit for this alert point. to save the location as a new alert point. 66 NX702E English...
  • Page 113: Editing An Alert Point

    On the newly opened screen, modify the type of the alert point, the direction from which you expect the alert, or (if applicable) the speed limit for this alert point. to save the changes to the alert point. NX702E English 67...
  • Page 114: Watching The Simulation Of The Route

    • : Jump to the next route event (manoeuvre). • : Pause the simulation. • : Jump to the previous route event (manoeuvre). 68 NX702E English...
  • Page 115 • : Tap to increase the speed of the simulation to 4, 8 or 16 times faster. Now tap again to return to the normal speed. to stop the simulation. NX702E English 69...
  • Page 116: Off-Road Navigation

    4 Off-road navigation When first started, Clarion Mobile Map calculates routes using the road network of the high quality vector maps provided with the product. You can switch the application to off-road mode in Navigation settings in one of the following ways: •...
  • Page 117: Reference Guide

    While driving without an active route: Smart Zoom will zoom in if you drive slowly and zoom out when you drive at high speed. 5.1.2 Daytime and night colour themes Clarion Mobile Map uses different colour themes during the day and during the night for both the map and the menu screens. •...
  • Page 118: Route Calculation And Recalculation

    • : Results in a route with fewer turns and no difficult manoeuvres. With this option, you can make Clarion Mobile Map to take, for example, the motorway instead of a series of smaller roads or streets. • Vehicle types: When creating a new vehicle profile, select one of the below vehicle types.
  • Page 119 Real-time Traffic events are also taken into account and sometimes greatly modify the route. Clarion Mobile Map automatically recalculates the route if you deviate from the proposed itinerary or if a newly received Traffic event concerns a part of the recommended route.
  • Page 120: Green Routing

    There is a special proximity warning for road safety cameras (like speed or red light cameras) and other proximity alert points (like schools or railroad crossings). These alert points are preloaded in Clarion Mobile Map. You can download more from www.clarion.naviextras.com or you can upload points in a specific text file if needed.
  • Page 121: Speed Limit Warning

    (ask your local dealer), or may not be fully correct for all roads in the map. The maximum speed set in the vehicle profile is also used for this warning. Clarion Mobile Map alerts you if you exceed the preset value even if the legal speed limit is higher.
  • Page 122: Traffic Information In Route Planning

    Clarion NX702E contains the TMC receiver that is needed to receive Traffic events. If public Traffic data is broadcast at your location, Clarion Mobile Map automatically takes into account the traffic events received. You do not need to set anything in the program. The receiver will automatically search the FM radio stations for TMC data, and the decoded information will immediately be used in route planning.
  • Page 123 Note! If there are traffic events on the recommended route that the application has not bypassed, the icon will open the list of significant traffic events to let you quickly check them. NX702E English 77...
  • Page 124: More' Menu

    Button Description You can configure the program settings, and modify the behaviour of Clarion Mobile Map. Fine-tune route planning options, change the look of the Map screen, turn on or off warnings, or restart the Configuration wizard, etc. See the next chapter for details.
  • Page 125: Settings Menu

    You can also access program usage statistics. 5.3 Settings menu You can configure the program settings, and modify the behaviour of Clarion Mobile Map. Tap the following buttons: The Settings menu has several options. Tap or scroll with your finger to see the full list.
  • Page 126: Sound And Warnings

    Natural Voice: These prerecorded sounds can only tell you basic information about turns and distances. • TTS Voice: These computed voices can tell you complex instructions, they can tell you the street names or read out the system messages for you. 80 NX702E English...
  • Page 127 Maps may contain information about the speed limits of the road segments. Clarion Mobile Map is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads in the map.
  • Page 128: Customise Quick Menu

    Use this switch to enable or disable the TMC receiver that can receive real-time traffic information. The rest of the buttons below are all related to the TMC function and are available only if the receiver is enabled. 82 NX702E English...
  • Page 129: Route Settings

    When calculating a new route, or when recalculation becomes necessary based on the received Traffic events, Clarion Mobile Map avoids traffic events if it makes sense. You can also set the minimum delay that triggers route recalculation, and you can instruct the application if you want to confirm every recalculation.
  • Page 130 They can be enabled or disabled separately from toll roads. Clarion Mobile Map includes toll roads (pay roads where there is a per-use charge) in the routes by default. If you disable toll roads, Clarion Mobile Map plans the best toll-free route.
  • Page 131 Manoeuvre restrictions and directional constraints are taken into account when planning a route. • Roads are used only if access for cars is allowed. • Private roads and resident-only roads are used only they are inevitable to reach the destination. • Walkways are excluded from routes. NX702E English 85...
  • Page 132 Usually the best selection for fast and normal cars. Gives a short route to minimise the distance to travel. It can be practical for slow vehicles. Searching for a short route regardless of the speed, this route type is rarely practical for normal vehicles. 86 NX702E English...
  • Page 133: User Profiles

    5.3.5 User profiles If more drivers use Clarion Mobile Map for navigating, their settings can be remembered by using one of the user profiles. Rename the profiles after tapping the edit button on the right so that all users know which profile to use and switch between profiles by tapping its name.
  • Page 134 Tap the name of the Place category to open the list of its subcategories. • to save the current Place visibility set or to load a previously saved one. Here you can also revert to the default visibility settings. 88 NX702E English...
  • Page 135: Visual Guidance Settings

    When you slow down while driving on a motorway, there is a chance that you are in a traffic jam so Clarion Mobile Map offers you a detour using the next exit. The message shows you distance of the exit and the difference in distance and estimated time compared to the original route.
  • Page 136: Display Settings

    Also, if there are avoidable parts of the original route ahead (like a tunnel, a toll road or a ferry), you will find them in the list in case you want to bypass them with the help of Clarion Mobile Map.
  • Page 137: Trip Monitor Settings

    Track logs, the sequence of the positions given by the GPS receiver, can be saved together with trip logs. They can later be displayed on the map. You can let the application save the track log whenever it saves a trip. NX702E English 91...
  • Page 138: Glossary

    Colour theme Clarion Mobile Map comes with different colour themes for daytime or night use of the map and menu screens. Themes are custom graphic settings and they can have different colours for streets, blocks or surface waters in 2D and 3D modes, and they display shades or shadows in different ways in 3D mode.
  • Page 139 Road Safety Camera Special alert points for speed, red light or bus lane cameras. Different data sources are available. You can configure Clarion Mobile Map to warn you when you approach one of these cameras. Detecting the location of Road Safety Cameras is prohibited in certain countries. It is the sole responsibility of the driver to check whether this feature can be used during the trip.
  • Page 140: End User Licence Agreement

    4.4 Error corrections, additions, updates or upgrades to the Software Product or the Databases used by the User following the conclusion of this Agreement shall also be deemed parts of the Software Product and Used in accordance with this Agreement. 94 NX702E English...
  • Page 141 Software Product (including translation (compilation) to other programming languages); 7.1.4 to decompile, disassemble, or reverse engineer the Software Product; 7.1.5 to evade the protection of the Software Product or to modify, circumvent or obviate such protection through technological or by any other means; NX702E English 95...
  • Page 142 NOTWITHSTANDING ANYTHING TO THE CONTRARY CONTAINED HEREIN, THIRD PARTY SUPPLIERS (E.G. DATABASE OWNERS, MAP PROVIDERS) OR AGENTS OF LICENSOR SHALL HAVE NO MONETARY LIABILITY TO THE USER FOR ANY CAUSE (REGARDLESS OF THE FORM OF ACTION) UNDER OR RELATING TO THIS AGREEMENT. 96 NX702E English...
  • Page 143 User is obliged to use the services in line with the terms and conditions thereof. 9.5 Purchase and acquisition of activation license for the use of certain functions, Databases, content or services may require Internet connection with no alternative way of acquisition offered by Licensor. 10 Anonymous data collection NX702E English 97...
  • Page 144 Applicable third party terms shall be referred in the "About" section of the Software Product or as part of this Agreement. When first using / enabling Online Content, User accepts compliance with those third party terms and conditions. 98 NX702E English...
  • Page 145 User accepts that the Google Local Search is declared "deprecated" and is not commercially supported by Google, Inc. and also it may be made unavailable without notice by Google in accordance with relevant terms service http://code.google.com/intl/hu- HU/apis/websearch/terms.html . NX702E English 99...
  • Page 146: Copyright Note

    This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and recording, without the express written consent of Clarion. © 2011 - Clarion Data Source © 2006-2010 Tele Atlas. All rights reserved. This material is proprietary and the subject of copyright protection, database right protection and other intellectual property rights owned by Tele Atlas or its suppliers.

Table of Contents