Table of Contents
Advertisement
OUTPUT MODULES DESCRIPTION (OXYGEN 3 and 3 ST)
E N G
11 OUTPUT MODULES DESCRIPTION (OXYGEN 3 and 3 ST)
11.1 MASTER section
OUTPUT 1: it controls the signal level on the output labelled OUTPUT 1 (balanced).
OUTPUT 2: it controls the signal level on the output labelled OUTPUT 2 (balanced).
BALANCE: it controls the signal balance on the outputs labelled OUTPUT 1-2-3 and
FIXED.
OUTPUT 3: it controls the signal level on the output output labelled OUTPUT 3
(unbalanced).
11.2 TALK OVER section
The TALK OVER section allows compression of all signals from CH 2 to 6 and of the
TELEPHONE channels in favour of CHANNEL1 (Master) output signal. It means that you can, f.i.,
automatically fade the level of music signals (from Stereo module) depending on the level of MIC1
microphone signal. This section will affect the MASTER outputs.
DEPTH: it controls the ratio of the compression: the lower is the value, the lower will be the
compressed audio level. The TALK OVER function can be disabled by turning the DEPTH
potentiometer in position 10.
THR(ESHOLD): the trimmer inside the hole adjusts the threshold intervention level of the
compressor (use a small screw-driver in order not to damage the trimmer).
REL(EASE): adjusts the release time of compressor: the higher is the value (turn it
clockwise), the longer is the time needed to go back to the former audio level. (use a small
screw-driver not to damage the trimmer).
11.3 MONITOR section
The Monitor section allows monitoring of selected buses (Ext In, Master, and PFL) without
interfering with normal operation of the main (Master) audio bus. For operator assistance,
the left pair of LED meters always visualize the level of the source selected in this section.
The Monitor section is capable of driving one pairs of headphones plus a Line output with
separated level controls.
POWER button: it switches On / Off the console. The LED inside the button glows
accordingly.
EXT IN control: it adjusts the EXT IN input signal level (for example a tuner signal)
OUT control: It affects the (line level) Monitor output on the rear panel.
HEADPHONE control: it affects the output to any headphones connected to the 1/4" jack
phones socket
Pag. 15
Hide quick links:
Advertisement
Table of Contents
