Epson DS-560 User Manual page 40

3. Hold down the Connect button and turn on the scanner.
4. Hold the Connect button until the Status and ! error lights flash alternately.
The scanner enters standby status for WPS connection for two minutes.
5. Enter the PIN code 01234565 into the wireless router or access point.
6. When the Status light on the scanner stays on, the Wi-Fi setup is complete.
7. Turn off the scanner.
8. Set the connection mode switch on the scanner to Wi-Fi.
9. Turn on the scanner.
When the Status light on the scanner stays on, the connection is established.
40