Displaying The Closeup View - HP OV-UX User Manual

Management for Non-Browserable Devices
About Closeup Views

Displaying the Closeup View

You can display a Closeup View in several ways, including the following:
Figure 11-1. Switching Hub Closeup View
11-2
From an HP OpenView map, use the left mouse button and double-click
on a hub, bridge, or switch symbol.
On an HP OpenView map, select a hub, bridge, or switch symbol. Then
display the Monitor menu and select HP Hub/Switch.
From a Closeup View of an SNMP-based AdvanceStack hub, display the
list of chained hubs by clicking on the Chained Devices button. The list
displayed identifies each chained hub by MAC address and hub type.
Select the MAC address for the desired hub.
Right-mouse-click on a device symbol and select Monitor HP Hub/
Switch.