Table of Contents
Advertisement
Performing Diagnostics
Rebooting a Device
Figure 9-1. Ping/Link Test
The number of successes or failures of the test packets reaching the
Destination IP or MAC Address are displayed at the top of the page. A failure
means that either the device at the destination address did not respond
within the timeout specified, or the data returned from the device indicated
an error.
The Defaults button will reset the Number of Packets to Send and the
Timeout value to the default values of 10 packets and 1 second, respectively.
Rebooting a Device
Rebooting the device is the same as powering off the device. Network
operation will be interrupted while the device initializes.
9-2
Advertisement
Table of Contents
