Installing Visualdsp++ And The Ez-Kit Lite - Analog Devices EZ-KIT Getting Started

Installing VisualDSP++ and the EZ-KIT Lite

Installing VisualDSP++ and the EZ-KIT Lite
If you have not already done so, install the ADSP-BF548 EZ-KIT Lite.
Ensure the board is disconnected from your PC, then install VisualDSP++
by following instructions in the VisualDSP++ Installation Quick Reference
Card, steps 1 to 3.
There are two USB interfaces on the ADSP-BF548 EZ-KIT Lite.
Be sure to use the debugger's interface (labelled
when connecting your computer to the board with provided USB
cable. The other USB interface (labelled
tions use.
Once the installation is complete, the amber LED (labeled
near the USB jack) is illuminated, indicating a successful physical connec-
tion between the PC and EZ-KIT Lite.
Install your license following instructions in the VisualDSP++ Installation
Quick Reference Card, step 4.
1-2 Getting Started with ADSP-BF548 EZ-KIT Lite
USB Debug Agent
) is for applica-
USB-OTG
, found
MON
)