What's New In This Manual; Technical Or Customer Support - Analog Devices EZ-KIT Getting Started

• Chapter 6,
Indicator" on page 6-1
Explores the keypad interface of the EZ-KIT Lite and introduces
the VisualDSP++ real-time kernel (VDK). You will use the LEDs
to communicate the application status.
• Chapter 7,
Finally, you will construct an application, drawing from the previ-
ous chapters in the manual. A working bitmap photo viewer
application will be created, including hard drive access, USB con-
nectivity, push button navigation, and audio sample triggering.
The application will be burned to the on-board flash devices. This
will allow the application to run while not connected to
VisualDSP++.

What's New in This Manual

This is the first revision of the Getting Started with ADSP-BF548 EZ-KIT
Lite.

Technical or Customer Support

You can reach Analog Devices, Inc. Customer Support in the following
ways:
• Visit the Embedded Processing and DSP products Web site at
http://www.analog.com/processors/technicalSupport
• E-mail tools questions to
processor.tools.support@analog.com
Getting Started with ADSP-BF548 EZ-KIT Lite
"Using ADSP-BF548 EZ-KIT Lite Keypad and LED
"Creating A Bootable Application" on page 7-1
Preface
xv