PlaySafe 22-PS311 Owner's Manual And Assembly Instructions page 8

Required Parts:
Glider attachment x1
Pre-Assembled Parts:
•
The seats should be attached to the horizontal poles. These must be disassembled to complete the steps below.
•
The foot rests should be attached to the vertical poles.
Step Illustration
1
2
8
GLIDER ASSEMBLY
Instructions
Secure the glider attachment with the V-
screw and the bolts at the squared portion
of the top bar.
Attach the two vertical poles to the glider
attachment. Start by removing the
hardware from the lower section of the
glider attachment. Align the vertical bar
with the glider attachment and re-insert the
hardware. Repeat the process for the other
side.
NOTE: The curved portion of the pole is
the top and it should face the inside of the
swing frame.
Vertical Poles x2 (Footrests attached)
Horizontal Poles x2 (Seats attached)
Hardware Reference
Part Ref. #: PSHW35, PSHW22
Part Ref. #: PSHW21, PSHW36
2006 Pacific Cycle, Inc.
©