Table of Contents
Advertisement
Required Parts:
See-Saw Bar and Extension
Step
Illustration
1
2
3
12
SEE-SAW ASSEMBLY
Frame Attachment
Instructions
Remove the hardware from the frame
attachment and connect the extension. Re-
insert the hardware and tighten.
NOTE: Be sure that the lower part of the
see-saw extension is buried and anchored
per the anchoring instructions on page 3.
Secure the frame attachment to the leg of
the frame with the hardware provided on
the leg.
NOTE: Be sure that the see-saw frame
attaches to the leg on the opposite side of
the slide. If the leg with the holes is near
the support bar with the slide attachments,
it should be moved to the other end.
Install the seats on the see-saw bar. Check
the nuts and bolts on the seat so that they
are secure.
Support Attachment
Hardware Reference
Part Ref. #: PSHW10
Part Ref. #: PSHW10
Part Ref. #: PSHW16
Seat x2
2006 Pacific Cycle, Inc.
©
Advertisement
Table of Contents
