Table of Contents
Advertisement
4
5
6
IMPORTANT LAST STEPS!
TIGHTEN ALL HARDWARE. Do not allow children to play on the swing set until it is fully assembled, all items are
tightened, and the unit is properly anchored.
•
Do not over tighten nuts and bolts. Once they are tight, turn them ½ rotation more to be sure they are secure.
•
Check all parts on all rides before allowing a child on the swing set.
•
Be sure to check and tighten the hardware on a regular basis to ensure the safety of the users.
Your Playsafe™ Westport Swing Set should now be fully assembled!
13
Mount the pivot onto the frame attachment.
The pivot should be between the two screw
heads, starting with the plastic bushing and
then the metal bracket.
Attach the see-saw bar to the pivot using
the hardware found on the see-saw bar.
Once fully assembled, check that the see-
saw hinges freely. If it does not, make sure
that the bolts on the see-saw bar are not
overly tightened.
Part Ref. #: PSHW10
Part Ref. #: PSHW10
2006 Pacific Cycle, Inc.
©
Advertisement
Table of Contents
