Quadsx Interconnect Module Panel - HP GbE2 User Manual

Table 4 QuadT2 Interconnect Module connectors
Item Description
5 Port 22 RJ-45 connector for 10/100/1000 Mb uplink for Switch A
6 Port 21 RJ-45 connector for 10/100/1000 Mb uplink for Switch A
7 Port 20 RJ-45 connector for 10/100/1000 Mb uplink for Switch A
8 Port 19 RJ-45 connector for 10/100/1000 Mb uplink for Switch A
Figure 9
QuadT2 Interconnect Module LEDs
Table 5
QuadT2 Interconnect Module LEDs
Item LED Description
1 Link activity
2 Link speed

QuadSX Interconnect Module panel

The QuadSX Interconnect Modules are inserted into the bottom-left-most and bottom-right-most bays on the rear side of
the server blade enclosure. Each QuadSX Interconnect Module has four LC connectors with link activity LEDs for
uplink network cabling. The LC connectors support 1000SX Ethernet short-haul fiber connections for uplink
connectivity.
Status
Green = Link and no activity
Green flashing = Link and activity
Amber = Port disabled
Off = No link
Amber = 1000 Mb/s
Green = 100 Mb/s
Off = 10 Mb/s
Introduction 19