HP C-Series Compatibility Manual page 15

Switch3800:admin> zoneAdd "vz33", "21:00:00:20:37:28:2e:65; 21:00:00:20:37:28:26:0d"
Verify the zones before making them active:
Switch3800:admin> zoneShow
Defined configuration:
zone: vz11 10:00:00:00:c9:24:3d:90; 50:06:01:60:88:02:90:cb
zone: vz22 10:00:00:00:c9:24:3f:75; 21:00:00:20:37:a7:ca:b7;
21:00:00:20:37:a7:c7:e0; 21:00:00:20:37:a7:c7:df
zone: vz33 10:00:00:e0:69:f0:43:9f; 21:00:00:20:37:28:31:6d;
21:00:00:20:37:28:24:7b; 21:00:00:20:37:28:22:ea;
21:00:00:20:37:28:2e:65; 21:00:00:20:37:28:26:0d
Effective configuration:
no configuration in effect
The following example shows how to create the configuration, which when activated, will be known
on the MDS as the active zone set.
Switch3800:admin> cfgCreate "mdscore1", "vz11; vz22; vz33"
Use the cfgEnable command to activate the configuration, for example:
Switch3800:admin> cfgEnable "mdscore1"
zone config "mdscore1" is in effect
Updating flash ...
Use the cfgShow command to view the display on this switch.
Switch3800:admin> cfgShow
Defined configuration:
cfg: mdscore1
vz11; vz22; vz33
zone: vz11 10:00:00:00:c9:24:3d:90; 50:06:01:60:88:02:90:cb
zone: vz22 10:00:00:00:c9:24:3f:75; 21:00:00:20:37:a7:ca:b7;
21:00:00:20:37:a7:c7:e0; 21:00:00:20:37:a7:c7:df
zone: vz33 10:00:00:e0:69:f0:43:9f; 21:00:00:20:37:28:31:6d;
21:00:00:20:37:28:24:7b; 21:00:00:20:37:28:22:ea;
21:00:00:20:37:28:2e:65; 21:00:00:20:37:28:26:0d
Effective configuration:
cfg: mdscore1
zone: vz11 10:00:00:00:c9:24:3d:90
50:06:01:60:88:02:90:cb
zone: vz22 10:00:00:00:c9:24:3f:75
21:00:00:20:37:a7:ca:b7
21:00:00:20:37:a7:c7:e0
21:00:00:20:37:a7:c7:df
zone: vz33 10:00:00:e0:69:f0:43:9f
21:00:00:20:37:28:31:6d
21:00:00:20:37:28:24:7b
21:00:00:20:37:28:22:ea
21:00:00:20:37:28:2e:65
21:00:00:20:37:28:26:0d
The new configuration is effective and defined.
Verify the other switches in the fabric.
C-series switches
For C-series switches, use the show zoneset active command:
Fabric interoperability: Merging fabrics based on C-series and B-series Fibre Channel switches applic-
ation notes 15