Supported Configuration Rules And Guidelines - HP C-Series Compatibility Manual

Fabric interoperability: merging fabrics based on c-series and b-series fibre channel switches application notes
Hide thumbs Also See for C-Series:
Table of Contents

Advertisement

MDS9509# show zoneset active
zoneset name mdscore1 vsan 1
zone name vz11 vsan 1
* fcid 0x610400 [pwwn 10:00:00:00:c9:24:3d:90]
* fcid 0x630500 [pwwn 50:06:01:60:88:02:90:cb]
zone name vz22 vsan 1
* fcid 0x630400 [pwwn 10:00:00:00:c9:24:3f:75]
* fcid 0x6514e2 [pwwn 21:00:00:20:37:a7:ca:b7]
* fcid 0x6514e4 [pwwn 21:00:00:20:37:a7:c7:e0]
* fcid 0x6514e8 [pwwn 21:00:00:20:37:a7:c7:df]
zone name vz33 vsan 1
* fcid 0x651500 [pwwn 10:00:00:e0:69:f0:43:9f]
* fcid 0x6105dc [pwwn 21:00:00:20:37:28:31:6d]
* fcid 0x6105e0 [pwwn 21:00:00:20:37:28:24:7b]
* fcid 0x6105e1 [pwwn 21:00:00:20:37:28:22:ea]
* fcid 0x6105e2 [pwwn 21:00:00:20:37:28:2e:65]
* fcid 0x6105e4 [pwwn 21:00:00:20:37:28:26:0d]
zone name $default_zone$ vsan 1
Notice the show zone command displays the zones that were created earlier on this switch.
MDS9509# show zone vsan 1
zone name vz1 vsan 1
pwwn 50:06:01:60:88:02:90:cb
pwwn 10:00:00:00:c9:24:3d:90
zone name vz2 vsan 1
pwwn 10:00:00:00:c9:24:3f:75
pwwn 21:00:00:20:37:a7:ca:b7
pwwn 21:00:00:20:37:a7:c7:e0
pwwn 21:00:00:20:37:a7:c7:df
zone name vz3 vsan 1
pwwn 10:00:00:e0:69:f0:43:9f
pwwn 21:00:00:20:37:28:31:6d
pwwn 21:00:00:20:37:28:24:7b
pwwn 21:00:00:20:37:28:22:ea
pwwn 21:00:00:20:37:28:2e:65
pwwn 21:00:00:20:37:28:26:0d

Supported configuration rules and guidelines

The following fabric configuration rules apply when merging the two fabrics:
Switches listed in
Only the standards-based interoperability mode, Mode-1, is supported on MDS switches.
Use the C-series Fabric Manager for all zoning administration. This includes creating, modifying,
enabling, and disabling zones in the combined fabric.
If you notice longer fabric reconfiguration times, select one of the B-series switches as the principal
switch.
If SAN boot is required and the HBA is connected to a B-series switch, lock the switch port as a
G_Port using the portcfggport command. This prevents the HBA from appearing in loop topo-
logy.
Cisco NPV mode is supported with SAN-OS 3.2(1a) or later.
16
Table 2
and
Table 3
can be used together in a fabric.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks c-seriesStorageworks b-series

Table of Contents