Quickie Salsa Instructions For Use Manual page 79

Model: Quickie Salsa M (MWD) With Re-hab Seat
NOTE: Salsa M is also
manufactured in the UK:
Sunrise Medical
Thorns Road
Brierley Hill
West Midlands
DY5 2LD
Maximum occupant mass
(test dummy mass):
140 kg
The wheelchair Quickie
Salsa conforms to the
following standards:
a) requirements and test
methods for static, impact
and fatigue strengths
(ISO 7176-8)
b) power and
control systems for
electric wheelchairs
requirements and test
methods (ISO 7176-14)
c) climatic test in
accordance with ISO
7176-9
d) requirements for
resistance to ignition in
accordance with
ISO 7176-16
e) the product is specified
as a Class B power chair
Rev.5.0
ISO7176-15
Overall length (with legrest)
Overall width
Total mass (w. batteries)
Mass of the heaviest part
Static stability downhill
Static stability uphill
Static stability sideways
Energy consumption (max. range) -
Dynamic stability uphill
Obstacle climbing (with kerb
climber)
Max. speed forward
Min. brake distance from max.
speed
Seat plane angle
Effective seat depth
Effective seat width
Seat surface height at front edge
Backrest angle
Backrest height
Footrest to seat distance
Leg to seat surface angle
Armrest to seat distance
Front location of armrest structure 260 mm
Min. turning radius
Nominal battery voltage
Battery cut-off voltage
Battery fusible links
Quickie Direct Actuator Control
Box fusible link
Mass of the test dummy
EN 12184
Max. kerb height
Ground clearance
Turning space
Speed control operation force
Direction control operation force
Min. Max. Comments
- 1150 mm 70° hanger
600 mm 660 mm 12" / 14" wheels
125 kg 176 kg without Balle/with Balle lift & tilt
Chair with all no tool removal
- 98 kg
parts taken off
worst case 41 cm deep seat, 0°
- 17°
tilt, -4° recline
worst case 51 cm deep seat, 29°
- 9.5°
tilt, 16° recline
worst case 41 cm deep seat, 0°
- 13.9°
tilt, 0° recline
26 km
9° tilt/16° recline &max. seat
- 8 °
height (not with balle)
75 mm Forward with 6 kph motors
10 kph only with 10 kph motor
6 kph 10 kph
option
1 m for 6 kph motor, 1.2 m for 10
1.0 m 1.2 m
kph motor
-5° only with MBL tilt + additional
-5° 30°
brackets
400 mm 560 mm
400 mm 560 mm
450 mm -
-5° 12° mechanical
560 mm 700 mm
340 mm 540 mm
110° -
210 mm 300 mm
560 mm
670 mm - 70° hanger
- 24V
- 16V
- - 150A in line fuse on each battery
15A blade fuse located on AUX
- -
supply of power loom
- 140 kg
Min. Max. Comments
- 75 mm
- 40 mm
1000 mm 1150 mm
2.2N R-Net
-
2.4N VR2
1.7N R-Net
-
1.9N VR2
79
SALSA/SALSA M