Quickie Salsa Instructions For Use Manual page 77

Model: Quickie Salsa M (MWD)
NOTE: Salsa M is also
manufactured in the UK:
Sunrise Medical
Thorns Road
Brierley Hill
West Midlands
DY5 2LD
Maximum occupant mass
(test dummy mass):
140 kg
The wheelchair Quickie
Salsa conforms to the
following standards:
a) requirements and
test methods for static,
impact and fatigue
strengths
(ISO 7176-8)
b) power and
control systems for
electric wheelchairs
requirements and test
methods (ISO 7176-14)
c) climatic test in
accordance with ISO
7176-9
d) requirements for
resistance to ignition in
accordance with
ISO 7176-16
e) the product is
specified as a Class B
power chair
Rev.5.0
ISO7176-15
Overall length (with legrest)
Overall width
Total mass (w. batteries)
Mass of the heaviest part
Static stability downhill
Static stability uphill
Static stability sideways
Energy consumption (max. range)
Dynamic stability uphill
Obstacle climbing (with kerb climber)
Max. speed forward
Min. brake distance from max. speed
Seat plane angle
Effective seat depth
Effective seat width
Seat surface height at front edge
Backrest angle
Backrest height
Footrest to seat distance
Leg to seat surface angle
Armrest to seat distance
Front location of armrest structure
Min. turning radius
Nominal battery voltage
Battery cut-off voltage
Battery fusible links
Quickie Direct Actuator Control Box
fusible link
Mass of the test dummy
EN 12184
Max. kerb height
Ground clearance
Turning diameter
Speed control operation force
Direction control operation force
Min. Max. Comments
- 1150 mm with 70° hanger
600 mm 660 mm max. width with seat width adjusted
to 51 cm
113 kg 145 kg
- 98 kg Chair with all no tool removal parts
taken off
- 17° worst case 41 cm deep seat, 0° tilt,
-4° recline
- 9.5° worst case 51 cm deep seat, 29°
tilt, 16° recline
- 13.9° worst case 41 cm deep seat, 0° tilt,
0° recline
- 26 km
8 ° 9° tilt/16° recline &max. seat height
(not with balle)
75 mm Forward with 6 kph motors
6 kph 10 kph 10 kph only with 10 kph motor op-
tion
1.0 m 1.2 m 1 m for 6 kph motor, 1.2 m for 10
kph motor
-5° 30° -5° only with MBL tilt + additional
brackets
406 mm 508 mm
394 mm 496 mm
470 mm - set 0° tilt, lowest seat height and no
modules
-4° 16° adjustable in 4° steps with tools
400 mm 500 mm
335 mm 610 mm with 70° hanger
110° - with 70° hanger
245 mm - adjustable with tools
310 mm 420 mm
670 mm - with 70° hanger
- 24V
- 16V for 255 seconds
- - 150A in line fuse on each battery
- - 15A blade fuse located on AUX
supply of power loom
- 140 kg
Min. Max. Comments
- 75 mm
- 40 mm
1000 mm 1150 mm
- 2.2N R-Net
2.4N VR2
- 1.7N R-Net
1.9N VR2
77
SALSA/SALSA M