Removing The Bottom Panel; Using The Reset Button - D-Link DCS-2332L User Manual

Section 1: Product Overview
Step 1:
Place the camera face down on a non-slip flat surface.
Step 2:
Carefully pry out the two protective rubber screw coverings using a thin flat blade.
Step 3:
Undo the two screws using a Philips #00 Screwdriver.
Step 4:
Lift off the protective panel.
If you need to install an SD Memory Card please skip to "Installing an SD Memory Card" on
page 14.
If you need to use the Reset Button follow these steps.
Step 1:
Follow the steps outlined in "Removing the Bottom Panel" on page 13.
Step 2:
Using a paperclip or similar tool, press and hold the Reset Button for 10 seconds. This will reset
the device to it's factory settings.
Step 3:
Follow the steps outlined in "Reattaching the Bottom Panel" on page 14.
D-Link DCS-2332L User Manual

Removing the Bottom Panel

Using the Reset Button

2
3
4
2
13