Table of Contents
Advertisement
3. I/O Setting
a. Input Setting:
IP Camera supports input and output. When the input condition is triggered,
it can trigger the relay, send the video to mail addresses /FTP server /
SAMBA.
• Intervel:
For example, if you select "10 sec" here, once the motion is detected
and action is triggered, it cannot be triggered again within 10 seconds.
• Based on the schedule:
When the option box is ticked, only during the selected schedule time
the I/O is enabled. That is, for example, the 11th hour of Monday has
not been colored in the schedule table, then no action will be triggered
even the camera detects input signal during 11:00~12:00 on Monday.
b. Output Setting:
The output mode affect the DO or relay out duration.
(i)
OnOff Switch: The camera triggers the external devise and lasts for 10
seconds. You can turn off the alarm manually by click "off" at the right
bottom of the live video page.
(ii)
Time Switch: The camera triggers the external devise and lasts for
certain of time according to the interval setting, and the user is not
allowed to break off the alarm manually.
52
Advertisement
Table of Contents
