Linkcom Link View CBL2MP User Manual page 50

b. Record File
Choose one of the format, AVI or JPEG
c. Record Time Setting
Set up the video recording time for Pre Alarm and Post Alarm when
motion is detected, I/O, or other devices is triggered
d. Network Dis-connected
To avoid video loss, the camera will start to save the video to local
SD card when it detect no network connection. The video recording will
continuously be saved into SD card and divided into every 10 minutes a file
until the network is reconnected successfully. The oldest file will be deleted
if the capacity of SD card is full.
This function is only enabled under wire connection.
e. Network IP check:
Key in the target IP address and interval. The camera checks once in
a while according to the setting interval time that if itself can linked to the
target IP address. If connection failed, the camera starts to save the video
to SD card.
50