Table of Contents
Advertisement
D. Event List
IP Camera provides multiple event settings.
1. Event Setting
a. Motion Detection
IP CAMERA allows 3 areas motion detection. When motion is detected,
it can send video to some specific mail addresses, trigger the output
devise, or save video to remote FTP / Micro SD card / Samba. To set up
the motion area, click "Area Setting". Using mouse to drag and draw the
area.
• Intervel:
For example, if you select "10 sec" here, once the motion is detected
and action is triggered, it cannot be triggered again within 10 seconds.
• Based on the schedule:
When the option box is ticked, only during the selected schedule time
the motion detection is enabled. That is, for example, the 11th hour of
Monday has not been colored in the schedule table, then no action will
be triggered even the camera detects motion during 11:00~12:00 on
Monday.
49
Advertisement
Table of Contents
