Linkcom Link View CBL2MP User Manual page 41

5. Wireless Setting (Optional): Support 802.11 b/g/n
To set up the IP camera via wireless network, use ethernet cable to
connect the camera first. After you finish the wireless setting and save it,
remove the ethernet cable.
Note: The IP address is the same under both wireless and wired network.
If the ethernet cable is plugged in the camera, the IP camera will use it to link
to the Internet instead of wireless router.
a. Status of Wireless Networks
The camera scans and shows the SSID, Mode, Security, and Signal
Strength of wireless network here.
b. Wireless Setting
(i) Mode: Infrastructure mode is used to link to the wireless router.Ad-hoc
mode is used to link to the PC directly. "Domain" and "Channel" options
appear only in the Ad-hoc mode.
(ii) SSID: The ID of wireless network service.
(iii) Domain: The wireless network standards are different in each region.
41