Scanpal 5100 Usb Communication Cable - Honeywell ScanPal 5100 User Manual

ScanPal 5100 HomeBase
This charging and communication cradle supports USB and RS-232 communication, enabling your
terminal to interface with the majority of enterprise systems. When a terminal is seated in a powered base,
its main battery pack charges in four hours for the standard capacity 2200mAh pack and in six hours for
the extended capacity 3300mAh pack.
A spare battery may also be charged in the battery charging well behind the terminal.
For more information, see
ScanPal 5100 QuadCharger
The ScanPal 5100 QuadCharger device, a four-slot charging station for ScanPal 5100 Li-ion battery
packs, can charge each battery in four hours (2200 mAh) or six hours (3300 mAh).
For more information, see

ScanPal 5100 USB Communication Cable

The ScanPal 5100 USB Communication Cable is used when communicating between the terminal and a
PC/laptop via the USB port.
Li-ion Battery Packs
The Li-ion battery pack provides the main power supply for the terminal. For more information,
Power on page 3-9.
For information on how to purchase these items, contact a Honeywell sales representative.
Battery Power
The intelligent battery technology inside the terminal features two types of battery power:
• The main battery pack
• The backup battery located inside the terminal (see
Both batteries work together to prevent data loss when the terminal is used over long periods of time.
Both batteries must be charged to full capacity before using the ScanPal 5100 for the first time!
Charge the main battery pack with the ScanPal 5100 charging cable for a minimum of 4 or 6 hours
depending on your battery before initial use.
Main Battery Pack
We recommend use of Honeywell Li-Ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
There are two Li-ion battery packs available for the ScanPal 5100:
Standard Capacity:
Extended Capacity:
The Li-ion battery pack is the primary power source for the ScanPal 5100 terminal as well as for the
internal backup battery.
™ Device
HomeBase Device
Device
™
QuadCharger Device
Li-ion 3.7V/2200mAh/8.1Wh
Li-ion 3.7V/3300mAh/12.2Wh
on page 9-1.
on page 10-1.
Internal Backup Battery
see Battery
on page 3-12)
3 - 9