Osaki OS-1000 Instruction Manual page 9

Attached the connecting rod and the fork of the reclining actuator with a flat head rivet,
and secure with a split pin as demonstrated in below PIC 3 & PIC 4.
A. Connecting rod(on the backrest)
B. Fork of reclining actuator (on the seat)
C. Flat head rivet
D. Split pin
PIC 3
C
A
PIC 4
Step 3:
Insert the wire plugs into the seat as demonstrated in PIC 5.
Note: Insert black to black and gray to gray, otherwise damage to the chair may result.
A
B
D
C
B
Black
Grey
PIC 5
8