Do you have a question about the OS-Hiro LT and is the answer not in the manual?
Questions and answers
THERESA ELIZABETH SPENCER
April 14, 2025
How do you adjust the intensity
1 comments:
Mr. Anderson
April 14, 2025
To adjust the intensity on the Osaki OS-Hiro LT, use the following controls:
1. 3D Massage Rollers: Adjust the depth of the rollers for desired intensity. 2. Air Pressure Intensity: Use the "Intensity Adjustment" button to cycle through 5 levels after activating the air-pressure function. 3. Massage Speed: Use the "Speed" button for Tapping, Clapping, Swedish, or Shiatsu functions to adjust speed through 5 levels. 4. Kneading Strength: Use the "Strength" button to change kneading intensity through 5 levels. 5. Shoulder and Back/Seat Air Massage: Adjust intensity with respective control buttons, each offering 5 levels.
Page 3
IMPORTANT SAFETY INSTRUCTIONS FCC Radiation Exposure Statement Industry Canada Notice Chair Installation 10-11 13-18...
Page 4
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using (this appliance). DANGER To reduce the risk of electric shock: • Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
Page 12
When placing a mat under the unit, the size of the mat should be sufficient to cover the areas where the unit touches and where the legrest could touch the floor, as shown in the dia gram on the above.
Page 15
SPOT ROLLER UP WIDTH PARTIAL ROLLER DOWN INTENSITY STRENGTH SPEED SHOULDER HAND FULL AIR SEAT FOOT...
Page 16
Press this button to light up the LCD screen. Press any massage function button to start massage. This will initiate the timer function. Press this button again to stop all massage functions, massage chair will return to its original position. 2.
Page 17
CHAIR RECLINE AND RESTORE Keep pressing to comfortably lay flat or to restore the chair to its original position. Full body Auto massage program 7.GENTLE 8.RELAX 9.THERAPY 10.VIGOROUS 11.DEMO 12.SWEDISH 13.THAI 14 . CHINESE 15.LEGREST LENGTH ADJUSTMENT BUTTON These two control buttons can adjust the length of chair legrest. Press once to lengthen or shorten the chair legrest.
Page 18
19/20.Roller up/ Roller down The massage position adjustment button for spot and partial massage. When the manual or automatic shoulder scanning can't meet individual, requirements, you manual fine tune the shoulder height location by pressing up/ down button within sound 10 seconds. Once appropriate location found release the key, the final position will be lock.
Page 19
22.SHIATSU Shiatsu function Start/Stop Control Button - 3 levels of width, 5 levels of speed to be adjusted. When mode 2 Tapping function is engaged, press this button to activate rhythmic mode 1 Shiatsu function for a full back massage at medium speed. Press this button again to activate mode 2 Shiatsu function.
Page 20
26.HEAT Lumbar Heat function Start/Stop Control Button. Press this button to activate lumbar heat function, press this button again to stop the Heat function. Note: During Auto Program mode, pressing this button can also disable/enable the Heat function. 27.Intensity The Intensity Adjustment Button for Alr-pressure-5 levels of intensity to be adjusted. After activating the air-pressure function(Auto and Manual), press this button to adiust the intensity in the cycle.
Page 21
32.HAND Hand Air Squeeze Massage Control Button - 5 levels of intensity to be adjusted. Press this button once to activate rhythmic air pressure massage at Hand Rest. Press this button again to stop the function. 33.FOOT Footrest Air Squeeze Massage Control Button -5 levels of intensity to be adjusted. Press this button once to activate rhythmic air pressure massage at Footrest.
Page 25
OS-Hiro LT 150W Rated Time 54.7” x 31.3” x 51.2” 79.2” x 20.1” x 23.4” 224.87lbs 185.19 lbs...
Need help?
Do you have a question about the OS-Hiro LT and is the answer not in the manual?
Questions and answers
How do you adjust the intensity
To adjust the intensity on the Osaki OS-Hiro LT, use the following controls:
1. 3D Massage Rollers: Adjust the depth of the rollers for desired intensity.
2. Air Pressure Intensity: Use the "Intensity Adjustment" button to cycle through 5 levels after activating the air-pressure function.
3. Massage Speed: Use the "Speed" button for Tapping, Clapping, Swedish, or Shiatsu functions to adjust speed through 5 levels.
4. Kneading Strength: Use the "Strength" button to change kneading intensity through 5 levels.
5. Shoulder and Back/Seat Air Massage: Adjust intensity with respective control buttons, each offering 5 levels.
This answer is automatically generated