Table of Contents
Advertisement
Troubleshooting
08
This massage chair is controller by microcomputer and is susceptible to power surge
even by +10% or -15%. The massage chair will show the following strange circumstance.
Situation
The Massage Chair cannot operate
even though it has been connected
to the power supply.
During operation, the Controller is
working but not the Massage Chair.
During operation, both Controller
and the Massager Chair are not
working.
Product Maintenance
09
● Avoid using water and other cleaning detergent to clean.
● Do not stack, pull harshly, stab or slit the surface of the massage chair.
● Please press the buttons softly during operation, avoid hitting with hard object.
● Please pull out the power supply plug after using.
● The recommend duration of the operation is 30 minutes. It is not advisable to
exceed the suggested time.
Solution
1) Check where the plug is well
connected and working well.
2) Check whether the switch on the
Massager Chair is turned to "I" position.
The Massage Chair could be overheated
after prolonged use. It will automatically
cool down to resume its normal condition.
Please turn off the power and allow the
Chair to cool off for 30 to 50 minutes.
1) In the auto timing mode, when the
timing is appropriate. Repress the
power switch.
2) Switch Off power and switch ON
again to activate the Chair.
18
Hide quick links:
Advertisement
Table of Contents
