Osaki OS-1000 Instruction Manual page 16

VIBRATING(CALVES)
Calves Vibration Control Button
Press this button to activate the calves vibration function.
Press the button again to stop the calves vibration function.
AUTO PROGRAM
Six pre-programmed massage sessions are activated by pressing the following
buttons: HEALTH CARE, FULL BODY RELAX, THERAPY, NECK/SHOULDER,
BACK/LUMBAR, SEAT/CALVES.
Manual Back Massage Programming
KNEADING & TAPPING
Kneading & Tapping Function Start/Stop Control Button
Press this button once to activate the kneading and tapping massage
KNEADING
function for a full back massage.
&TAPPING
Press the button again to stop the kneading & tapping massage function.
Press the FAST/SLOW button to adjust the speed of the massage while the
kneading and tapping function is activated.
KNEADING
Kneading Function Start/Stop Control Button
Press this button once to activate the kneading massage function for a full
KNEADING
back massage. Press the button again to stop the kneading massage
function.
Press the FAST/SLOW button to adjust the kneading speed while the
kneading function is activated.
TAPPING
Tapping Function Start/Stop Control Button – 3 levels of width (narrow,
medium, wide);
TAPPING
Press this button once to activate the tapping function for a full back
massage at medium width and speed.
Press the button again to stop the tapping massage function.
Press the WIDTH button and the SPEED button to adjust the tapping width
and speed while the tapping function is activated.
15