Redial; Automatic Redial; Hold - AT&T 924 User Manual

924 book_1ATT 8/8/00
TELEPHONE OPERATION

Redial

Lift the handset, press K, or press h and listen for a
1
dial tone. The Prime Line will be selected automatically.
Press A to call the last number dialed (up to 24 digits).
2
To override Prime Line selection, press the desired LINE button, then
follow Steps 1 and 2 above.

Automatic Redial

This phone can automatically redial the last number you called up to
10 times.
NOTE: To use this feature with a line other than the Prime Line, press a
LINE button before Steps 1 and 2 below.
Press A without lifting the handset, pressing K, or
1
pressing h. You will hear the number being dialed. If the
called number is busy, the phone redials every 60 seconds (up to
10 times).
When the call is answered, lift the handset, press K, or press
2
h to talk.
To stop automatic redialing at any time, press A again. Lifting the
handset, pressing K or pressing h to make a call will also
cancel automatic redial.
NOTE: This feature cannot be used to add a third party to an existing
call (conferencing). This feature only works when the phone is not
in use.

Hold

When a call is put on hold, nothing either party says can be heard, and the
red Line-in-Use light for the held line flashes. You cannot access any special
features.
Press H. If you are using the handset, you can place the phone
1
in the cradle.
2
To return to the conversation, press the appropriate LINE button,
then lift the handset, press K or press h (if you do not
select a line, you will be connected to the Prime Line)
— OR —
Lift the handset of an extension phone of the line on hold.
14
11:24 AM Page 14