Switching Lines During A Call; Conference Calls; Conference Call Options - AT&T 924 User Manual

924 book_1ATT 8/8/00

Switching Lines During a Call

During a call on one line, you can make or answer a call on another line by
pressing H. You can use the H and LINE buttons to switch back and
forth between calls as often as necessary. Example: While using Line 1,
Line 2 rings:
Press H to hold Line 1.
1
Press l, then lift the handset, press K or press h
2
to answer the other call.
Press L, then lift the handset, press K or press h
3
to hang up Line 2 and return to your first call
— OR —
Press H to hold Line 2, press L, then lift the handset, press
K or press h to return to your first call.

Conference Calls

You can use two lines at the same time to set up a three-way conference call.
Make or answer a call, and press H.
1
2 Establish a call on another line.
Press c.
3
4
Hang up to end a conference call.
If one caller hangs up during a conference call, you might hear a dial tone.
Press the LINE button of the remaining call to disconnect the other line
and eliminate the dial tone.

Conference Call Options

To place a conference call on hold:
Press H to put both lines on hold.
1
Press c to release hold and continue the conference call.
2
NOTE: If more than one line is on hold, you cannot form a conference
while talking to a third party.
To talk privately with one caller:
Press H.
1
2
Press the LINE button of the person with whom you want to
speak privately.
Press c to return to your conference call.
3
To disconnect one party from a conference call and keep the other one on
the line, press the LINE button of the call you want to continue.
11:24 AM Page 15
TELEPHONE OPERATION
15