Table of Contents
Advertisement
Cleaning
When the unit gets dirty, wipe it with a
clean, soft dry cloth. If necessary, wipe it
with a soft cloth dampened with mild
soapy water, then a fresh cloth with clean
water. Wipe dry immediately with a dry
cloth. NEVER use benzene, aerosol clean-
ers, thinner, alcohol or any other volatile
cleaning agent. Do not use abrasive
cleaners, as they may damage the finish
of metal parts. Avoid spraying insecticide
near the unit.
Moving The Unit
Before moving the unit, be certain to dis-
connect any interconnection cords with
other components, and make certain
that you disconnect the unit from the AC
outlet.
Important information for the user
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. The limits are
designed to provide reasonable protection
against harmful interference in a resi-
dential installation. This equipment gen-
erates, uses and can radiate radio
frequency energy and, if not installed
and used in accordance with the instruc-
tions, may cause harmful interference to
radio communication. However, there is
no guarantee that harmful interference
will not occur in a particular installa-
tion. If this equipment does cause harm-
ful interference to radio or television
reception, which can be determined by
tuning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the follow-
ing measures:
Safety Information
3
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
This device complies with Part 15 of the
FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept interference
received, including interference that may
cause undesired operation.
NOTE: Changes or modifications may
cause this unit to fail to comply with Part
15 of the FCC Rules and may void the
user's authority to operate the equip-
ment.
Unpacking and Installation
The carton and shipping materials used
to protect your new receiver during ship-
ment were specially designed to cushion
it from shock and vibration. We suggest
that you save the carton and packing
materials for use in shipping if you move
or should the unit ever need repair.
To minimize the size of the carton in
storage, you may wish to flatten it. This
is done by carefully slitting the tape
seams on the bottom and collapsing the
carton down to a more two dimensional
appearance. Other cardboard inserts may
be stored in the same manner. Packing
materials that cannot be collapsed
should be saved along with the carton in
a plastic bag.
If you do not wish to save the packaging
materials, please note that the carton
and other sections of the shipping protec-
tion are recyclable. Please respect the
environment and discard those materials
at a local recycling center.
Conventions
In order to help you use this manual
with the remote control, front panel
controls, rear panel connections and
on-screen menus, certain conventions
have been used.
– (bold type) indicates a
EXAMPLE
specific remote control or front panel
button, or rear panel connection jack
– (OCR type) indicates a
EXAMPLE
message that is visible through the on-
screen menu system
– (number in a square) indicates a
1
specific front panel control
– (number in a circle) indicates an
¡
indicator in the main front panel display
– (number in an oval) indicates a
a
button or indicator on the remote
– (letter in a circle) indicates a rear
å
panel Audio or System connection
– (letter in a square) indicates a
A
specific rear panel video connection
Hide quick links:
Advertisement
Table of Contents
