Sleep Settings; Wireless Network Settings; Brightness - URC RM-2 Owner's Manual

RM-2 T -W Wi-Fi R
WO AY EMOTE

Sleep Settings

You can adjust the amount of time the LCD
remains ON when the remote is not in use.
The time can be set independently based on
whether the remote is using battery power or
sitting on the cradle.
Once the Sleep Timers are adjusted, press the
Ok button. Pressing the Cancel button will revert to the
remotes last saved setting.

Wireless Network Settings

WARNING! Only use this button when
instructed to by Technical Support or your
Custom Professional. The screen displays
network information about your RM-2 and the
connected wireless network. Do not make any
changes on this screen!

Brightness

Adjust the screen brightness by pressing the
adjacent hard buttons to increase or decrease
the brightness level.
Once the brightness is adjusted, press the Ok
button. Pressing the Cancel button will revert
to the remotes last saved setting.
Note: The higher the brightness, the faster the batteries will deplete.
Page 6