Hunter Ceiling Fans Installation And Operation Manual page 10

10 10 10 10 10
• Release the light button when the desired light level is
reached.
• Continue to hold the light button to repeat the cycle.
(Maximum–light level decrease–OFF)
• While the light is ON, holding the light button will de-
crease the light brightness.
• Turning the light OFF resets the dimming function. The
next press of the light button will start at maximum bright-
ness.
3. Fan Operation:
• Press the High, Medium, or Low speed buttons to turn
the ceiling fan ON at the desired speed.
• Press the fan OFF key to turn the ceiling fan OFF.
For best fan operation: Allow the ceiling fan motor to start on
High, then select the desired speed.
4. Manual Light Switch Operation:
To turn the lights ON without the transmitter, turn OFF the
wall switch for 5 seconds, then turn the wall switch back ON.
The light will turn ON at maximum brightness, and the fan will
be OFF.
For everyday operation, leave the wall switch ON. However, if
the control will not be used for an extended period of time (5
days or more), turn the wall switch OFF.
Fan High
Fan Medium
Fan Low
Fan Off
Light Key
Figure 30 - remote operation
mounting the remote holder
A holder is supplied with the transmitter which can be mounted to
a existing toggle switch wall plate. The holder will help prevent mis-
placement of your transmitter by providing a permanent recep-
tacle. See figure 31.
If desired, the holder can be mounted to at convenient location on
a wall.
Figure 31 - Remote holder assembly
41854-01 11/12/2003
cleaning your ceiling fan
caring for finishes
For cleaning, a soft brush or lint-free cloth should be used to pre-
vent scratching the finish. A vacuum cleaner brush nozzle can re-
move heavier dust. Surface smudges or an accumulation of dirt
and dust can easily be removed by using a mild detergent and a
slightly dampened cloth. An artistic agent may be used, but never
use abrasive cleaning agents as they will damage the finish.
caring for blades
Wood finish blades should be cleaned with a furniture polishing
cloth. Occasionally, a light coat of furniture polish may be applied
for added protection and beauty. Painted and high-gloss blades
may be cleaned in the same manner as the fan finish.
© 2003 Hunter Fan Company