Inserting A Multimediacard Or Secure Digital Card - Dazzle Zio! User Manual

Inserting a MultiMediaCard or Secure Digital Card

Before you insert a MultiMediaCard or Secure Digital card in the ZiO HS Reader/Writer,
position the unit with the Access Indicator on top, as shown below. Then flip its protective
ring to the open position to uncover the USB connector and the card slot and convert the
ring to a stand, as described in
or deleting from a Secure Digital card, make sure the write protect switch is not in the
locked position (see the illustration below).
To insert a MultiMediaCard or Secure Digital card, follow these steps:
1. Position the MultiMediaCard or Secure Digital card in the direction shown in the
illustration below.
2. Insert the card with the label on top and the gold contacts facing down (you should
not see the gold contacts when inserting the card).
Caution: Notice the notched corner of the MultiMediaCard or Secure Digital card and
do not insert the card in the wrong direction. To insert properly, be sure that the card's
notch is at the top right corner.
3. Gently push the card all the way into the slot until it locks in place.
Important: If excessive force is required, or the card just doesn't seem to fit, do not
force the card in the ZiO HS Reader/Writer. Contact the Dazzle Technical Resource
Center for assistance.
Access Indicator (on top)
Notch at
top right corner
64
MB
MultiMedia
Dazzle ZiO! Hi-Speed Portable Reader/Writer User's Guide • Using the Reader/Writer • Page 23
"Hardware Overview" on page
Secure Digital Card
Write Protect Switch
Flip up to unlock
Flip down to lock
7. If you plan on writing to
64
MB
SD Card