Removing A Card On A Macintosh - Dazzle Zio! User Manual

Removing a Card on a Macintosh

Before you remove a digital media card, be sure the Access Indicator at the top of the ZiO
HS Reader/Writer is not flashing. The Indicator flashes when the ZiO HS Reader/Writer is
reading or writing data on a card. Removing a card during read/write access causes lost
or corrupted data.
Removing a Card Using Mac 0S 9.x
To remove a digital media card from the ZiO HS Reader/Writer using Mac OS 9.x, please
wait until the Access Indicator stops flashing, then follow the instructions below.
1. Drag the card's removable disk icon and drop it onto the Trash icon.
The removable disk icon disappears from the desktop. A dialog box similar to the one
below appears. It is now safe to remove the card.
2. Click OK in the dialog box, then grasp the end of the card with your thumb and index
fingers, and remove it from the slot.
Caution: Do not remove a mounted card or disconnect the ZiO HS Reader/Writer until you
drag the removable disk icon to the Trash. Improper removal can corrupt the data stored
on your card. If removed improperly, a warning message may state that there is a problem
with the media and prompt you to check the disk for data loss.
Dazzle ZiO! Hi-Speed Portable Reader/Writer User's Guide • Using the Reader/Writer • Page 40