Installing The Hardware On A Pc - Dazzle Zio! User Manual

Installing the Hardware on a PC

You can connect your ZiO HS Reader/Writer to computers with USB 1.1 ports or USB 2.0
ports. Computers with USB 2.0 ports will utilize the ZiO HS Reader/Writer's
Hi-Speed transfer capability, moving data at a much faster rate than computers with USB
(
1.1 ports.
Note: If you are running Windows 98 SE, you must install the required drivers before con-
necting your ZiO HS Reader/Writer to your computer, as described in the previous section,
beginning on page 9.
Before you connect your ZiO HS Reader/Writer, position the unit with the Access Indicator
on top, as shown below. Then flip its protective ring to the open position to uncover the
USB connector and the card slot and convert the ring to a stand.
ZiO HS Reader/Writer/Closed
Dazzle ZiO! Hi-Speed Portable Reader/Writer User's Guide • Getting Started • Page 14
Grasp top of protective ring
and pull forward to uncover
USB connector and card slot
(and convert to stand)
USB Connector
Access Indicator
ZiO HS Reader/Writer/Open
Card Slot