Inserting A Multimediacard Or Secure Digital Card - Dazzle Digital Media High-Speed Reader/Writer User Manual

Inserting a MultiMediaCard or Secure Digital Card

If you plan on writing to or deleting from a Secure Digital card, make sure the write protect
switch is not in the locked position (see the illustration below).
To insert a MultiMedia or Secure Digital Card, follow these steps:
1. Position the MultiMediaCard or Secure Digital card in the direction shown in the
illustration below.
2. Insert the card with the label on the left and the gold contacts facing inward (on the
right side).
Important: Notice the notched corner of the MultiMediaCard or Secure Digital card and
do not insert the MultiMediaCard/Secure Digital card in the wrong direction. To insert
properly, be sure that the card's recessed notch is located in the upper corner.
You should see the media's gold contacts on the right when inserting it into the slot.
3. Gently push the card in all the way until it locks in place.
Caution: Insert the card gently. If it is forced in, the reader/writer or the actual card
may be damaged, or data on the card may be lost or corrupted. If excessive force is
required, or the card just doesn't seem to fit, do not force the card in the reader.
Contact the Dazzle Technical Resource Center for assistance.
To utilize advanced features of Secure Digital cards as well as locking and encryption
features, please refer to the documentation provided with your Secure Digital card or
host device.
Dazzle Digital Media HS Reader/Writer User's Guide • Using the Digital Media Reader/Writer • Page 21
Notch
Secure Digital Card
Write Protect Switch
Flip up to unlock
Flip down to lock
64
MB
SD Card