Setting The Built-In Clock - Sony Owner’s Guide Operational Manual

Pack to the interface box.
Notes
• Remove the battery pack if the camera will be out of use
for an extended period.
• Charge the battery, using the specified battery charger,
before use.
For charging, refer to the instructions for the battery
charger.
1
Attach the BKP-L551 Battery Adaptor to the interface
box.
Interface box
2
Aligning the groove on the BP-GL95 with the
projection on the BKP-L551, slide the BP-GL95 so
that the connectors engage.
3
Connect the DC cable of the BKP-L551 to the DC IN
connector of the interface box.
When the battery is connected to the DC IN connector of
the interface box, power is fed to the camera head,
viewfinder, and lens.
Note
Power is not supplied to the recorder mounted on the
camera head. To supply power to the recorder, connect a
power supply to the DC IN connector on the camera head.
BKP-L551
2-8 Setting the Built-in
Clock
When using the camera for the first time, set the built-in
clock to the local time, using the <DATE> page of the
MAINTENANCE menu displayed on the viewfinder
screen.
To set the menu on monitor screen, connect a monitor to
either of the MONITOR OUT HD SDI connectors.
Setting procedure
1
Turn on the camera.
2
While holding the MENU SEL/ENTER dial pressed,
press the VF MENU/DISPLAY button.
The camera enters Menu Operation mode, and "TOP"
is displayed at the upper-right corner of the screen.
3
Rotate the MENU SEL/ENTER dial to set the pointer
to "TOP" and push on the MENU SEL/ENTER dial.
The TOP MENU screen is displayed.
< T O P M E N U >
U S E R
B
U S E R M E N U C U S T O M I Z E
A L L
O P E R A T I O N
z
P A I N T
z
M A I N T E N A N C E
z
N E T W O R K
z
F I L E
z
D I A G N O S I S
z
4
Rotate the MENU SEL/ENTER dial to position the
pointer to MAINTENANCE and push on the MENU
SEL/ENTER dial.
The CONTENTS page of the MAINTENANCE menu
is displayed.
(The following display examples are those in Custom
mode. They include some items not displayed in Cine
mode.)
C O N T E N T S
xx
B 0 1 . < B A S E S E T T I N G >
0 2 . < A U T O S E T U P >
0 3 . < W H I T E S H A D I N G >
0 4 . < B L A C K S H A D I N G >
0 5 . < O H B M A T R I X >
0 6 . < A U D I O >
0 7 . < O U T P U T F O R M A T >
0 8 . < D O W N C O N V E R T E R >
0 9 . < P O W E R S A V E >
1 0 . < B A T T E R Y A L A R M S E T >
5
Turn the MENU SEL/ENTER dial to scroll the page
and position the pointer to <DATE>.
M 0 0
25

Setting the Built-in Clock