Specifications & Dimensions - Whirlpool WHES20 Installation And Operation Manual

Specifications & Dimensions
Model Code
Rated Softening Capacity (Grains @ Salt Dose)
Rated Efficiency (Grains/Pound of Salt @ Minimum Salt Dose)
Water Used During Regeneration @ Minimum Salt Dose
Total Water Used Per Regeneration @ Maximum Salt Dose
Rated Service Flow Rate
Amount of High Capacity Ion Exchange Resin
Pressure Drop at Rated Service Flow
Water Supply Max. Hardness
Water Supply Max. Clear Water Iron
Water Pressure Limits (minimum / maximum)
Water Temperature Limits (minimum / maximum)
Minimum Water Supply Flow Rate
Maximum Drain Flow Rate
Salt Storage Capacity
*
Capacity to reduce clear water iron is substantiated by WQA test data. State of Wisconsin requires additional
treatment if water supply contains clear water iron exceeding 5 ppm.
**Canada working pressure limits: 1.4 - 7.0 kg/cm
These systems conform to NSF/ANSI 44 for the specific performance claims as verified and substantiated by
test data.
The efficiency rating is only valid at the stated salt dose. These softeners were efficiency rated according to
NSF/ANSI Standard 44.
Variable Salt Dose: The salt dose is selected by the electronic controls at regeneration time based on the
amount needed.
Questions? Call Toll Free 1-866-986-3223
When you call, please be prepared to provide the model, date code and serial number,
found on the rating decal, typically located on the rim below the salt lid hinges.
.
2
19"
IN
3-3/8"
OUT
IN – OUT
36-1/2"
or visit www.ecodynewatertreatment.com
Model WHES20
LE20
8,700 @ 1.7 lbs.
16,400 @ 5.4 lbs.
20,100 @ 9.1 lbs.
5,000 @ 1.7 lbs.
3.5 gal. / 1,000 grains
32.1 gallons
6.5 gpm
.57 cu. ft.
9.3 psig
50 gpg
3 ppm
18"
43-5/16"
35"
Monday- Friday, 8 AM - 7 PM EST
3
Model WHES30
LE31
14,700 @ 2.9 lbs.
25,400 @ 8.0 lbs.
30,100 @ 13.1 lbs.
5,000 @ 2.9 lbs.
2.3 gal. / 1,000 grains
35.2 gallons
8.0 gpm
.82 cu. ft.
14.4 psig
95 gpg
8 ppm*
20 - 125 psi**
40 - 120 °F
3 gpm
2.0 gpm
175 lbs.
FIG. 1