Tips On Using Your Computer; Reading The Manuals; Connecting To Power; Turning On The Computer - Lenovo ZhaoYang E49 User Manual

Solution: A compatible device driver is a requirement to ensure correct operation and performance of
each component in your computer. If your computer is preinstalled with an operating system, Lenovo
provides all device drivers that you need on the hard disk drive.
• Question: What can I do if the backup process fails?
Solution: If you can start the backup feature without a problem, but it fails during the backup process,
try the following:
1. Close other applications, then restart the backup process.
2. Check if the destination medium is damaged, try to select another file path and then try again.
• Question: When do I need to restore the computer to the factory default settings?
Solution: You can restore the computer to the factory default settings when it fails or when you need
to reinstall the operating system. This will restore your computer back to the initial state when you first
started it up after receiving it from the shore. Ensure that you have backed up your critical data before
doing this to avoid data loss.

Tips on using your computer

This topic provides tips on using your computer for the first time.

Reading the manuals

Read the manuals that come with your computer before using the computer.

Connecting to power

The supplied battery pack is not fully charged at purchase. To charge the battery and begin to use your
computer, install the battery pack, connect the computer to an electrical outlet, and then the battery will be
charged automatically.
Installing the battery pack
For instructions on installing the battery pack, refer to the Safety, Warranty, and Setup Guide that comes
with your computer.
Connecting the computer to an electrical outlet
To connect the computer to an electrical outlet, do the following:
1. Plug the power cord into an electrical outlet.
2. Connect the power cord to the transformer pack.
3. Connect the ac power adapter to the ac power connector of the computer.

Turning on the computer

Press the power button to turn on the computer.

Configuring the operating system

You might need to configure the operating system when you use the computer for the first time. The
configuration process might include the following steps:
• Accepting the end user license agreement
• Configuring the Internet connection
• Registering the operating system
• Creating a user account
12
User Guide